Two plates are connected by filler welds of size $10$ mm and subjected to tension, as shown in the sketch. The thickness of each plate is $12$ mm. The yield stress and the ultimate tensile stress of steel are $250$ MPa and $410$ MPa, respectively. The welding is done in the workshop $(Y_{mw}=1.25)$. As per the Limit State Method of $IS \: 800:2007$, the minimum length (rounded off to the nearest higher higher multiple of $5$ mm) of each weld to transmit a force $P$ equal to $270$ kN is
- $100$ mm
- $105$ mm
- $110$ mm
- $115$ mm