GO Civil
Login
Register
Dark Mode
Brightness
Profile
Edit Profile
Messages
My favorites
My Updates
Logout
Filter
Recent
Hot!
Most votes
Most answers
Most views
Previous GATE
Featured
Most viewed questions in Geomatics Engineering
0
votes
2
answers
1
GATE2018 CE-1: 35
The following details refer to a closed traverse: Line Consecutive coordinate Northing (m) Southing (m) Easting (m) Westing (m) PQ --- $437$ $173$ --- QR $101$ ---- $558$ ---- RS $419$ --- --- $96$ SP ---- $83$ ---- $634$ The length and direction (whole circle bearing) of ... are $1$ m and $90^{\circ}$ $2$ m and $90^{\circ}$ $1$ m and $270^{\circ}$ $2$ m and $270^{\circ}$
The following details refer to a closed traverse:LineConsecutive coordinateNorthing (m)Southing (m)Easting (m)Westing (m)PQ -$437$$173$ -QR$101$ $558$ RS$419$ $96$SP ...
gatecse
4.0k
points
gatecse
asked
Feb 17, 2018
Geomatics Engineering
gate2018-ce-1
geomatics-engineering
traversing
+
–
0
votes
0
answers
2
GATE2016-2-55
A tall tower was photographed from an elevation of $700$ m above the datum. The radial distances of the top and bottom of the tower from the principal points are $112.50$ mm and $82.40$ mm, respectively. If the bottom of the tower is at an elevation $250$ m above the datum, then the height (expressed in m) of the tower is _________
A tall tower was photographed from an elevation of $700$ m above the datum. The radial distances of the top and bottom of the tower from the principal points are $112.50$...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 27, 2018
Geomatics Engineering
gate2016-ce-2
numerical-answers
geomatics-engineering
photogrammetry
+
–
0
votes
0
answers
3
GATE Civil 2013 | Question: 47
A theodolite is set up at station A and a $3$ m long staff is held vertically at station B. The depression angle reading at $2.5$ m marking on the staff is $6^{\circ}10'$. The horizontal distance between A and B is $2200$ m. Height of instrument ... m and R.L. of A is $880.88$ m. Apply the curvature and refraction correction, and determine the RL of B (in m) _______
A theodolite is set up at station A and a $3$ m long staff is held vertically at station B. The depression angle reading at $2.5$ m marking on the staff is $6^{\circ}10�...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 25, 2018
Geomatics Engineering
gate2013-ce
numerical-answers
geomatics-engineering
horizontal-and-vertical-curves
+
–
0
votes
0
answers
4
GATE2019 CE-1: 47
A parabolic vertical curve is being designed to join a road of grade $+5 \%$ with a road of grade $-3 \%$. The length of the vertical curve is $400 \: m$ measured along the horizontal. The vertical point of curvature (VPC) is located on the ... $m$, round off to the nearest integer) is _________
A parabolic vertical curve is being designed to join a road of grade $+5 \%$ with a road of grade $-3 \%$. The length of the vertical curve is $400 \: m$ measured along t...
Arjun
13.0k
points
Arjun
asked
Feb 14, 2019
Geomatics Engineering
gate2019-ce-1
numerical-answers
horizontal-and-vertical-curves
geomatics-engineering
+
–
0
votes
0
answers
5
GATE2016-1-55
The vertical angles subtended by the top of a tower T at two instrument stations set up at P and Q, are shown in the figure. The two stations are in line with the tower and spaced at a distance of $60$ m. Readings taken from these two stations on a leveling staff ... ($BM=450.000$ m) are also shown in the figure. The reduced level of the top of the tower T (expressed in m) is _____
The vertical angles subtended by the top of a tower T at two instrument stations set up at P and Q, are shown in the figure. The two stations are in line with the tower a...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 27, 2018
Geomatics Engineering
gate2016-ce-1
numerical-answers
geomatics-engineering
distance-and-angle-measurement
+
–
0
votes
0
answers
6
GATE2017 CE-2-55
An observer standing on the deck of a ship just sees the top of a lighthouse. The top of the lighthouse is $40$ m above the sea level and the height of the observer’s eye is $5$ m above the sea level. The distance $9$ in km, up to one decimal place) of teh observer from the lighthouse is __________
An observer standing on the deck of a ship just sees the top of a lighthouse. The top of the lighthouse is $40$ m above the sea level and the height of the observer’s e...
gatecse
4.0k
points
gatecse
asked
Aug 7, 2019
Geomatics Engineering
gate2017-ce-2
numerical-answers
geomatics-engineering
levelling
+
–
0
votes
0
answers
7
GATE2019 CE-2: 22
The data from a closed traverse survey PQRS (run in the clockwise direction) are given in the table $\begin{array}{|c|c|} \hline \text{Line} & \text{Included angle (in degrees)} \\ \hline PQ & 88 \\ \hline QR & 92 \\ \hline RS & 94 \\ \hline SP & 89 \\ \hline \end{array}$ The closing error for the traverse PQRS (in degrees) is ______
The data from a closed traverse survey PQRS (run in the clockwise direction) are given in the table$$\begin{array}{|c|c|} \hline \text{Line} & \text{Included angle (in d...
Arjun
13.0k
points
Arjun
asked
Feb 12, 2019
Geomatics Engineering
gate2019-ce-2
numerical-answers
geomatics-engineering
traverse-survey
+
–
0
votes
0
answers
8
GATE2019 CE-2: 33
A camera with a focal length of $20$ cm fitted in an aircraft is used for taking vertical aerial photographs of a terrain. The average elevation of the terrain is $1200 \: m$ above mean sea level (MSL). What is the height above MSL at which an aircraft must fly in order to get the aerial photographs at a scale of $1:8000$? $2600 \: m$ $2800 \: m$ $3000 \: m$ $3200 \: m$
A camera with a focal length of $20$ cm fitted in an aircraft is used for taking vertical aerial photographs of a terrain. The average elevation of the terrain is $1200 \...
Arjun
13.0k
points
Arjun
asked
Feb 12, 2019
Geomatics Engineering
gate2019-ce-2
geomatics-engineering
photogrammetry-flying-height
+
–
0
votes
0
answers
9
GATE2015-1-24
Which of the following statements is FALSE? Plumb line is along the direction of gravity Mean Sea Level (MSL) is used as a reference surface for establishing the horizontal control Mean Sea Level (MSL) is a simplification of the Geoid Geoid is an equi-potential surface of gravity
Which of the following statements is FALSE?Plumb line is along the direction of gravityMean Sea Level (MSL) is used as a reference surface for establishing the horizontal...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Geomatics Engineering
gate2015-ce-1
geomatics-engineering
levelling
mean-sea-level
+
–
0
votes
0
answers
10
GATE2020-CE-1-38
An open traverse PQRST is surveyed using theodolite and the consecutive coordinates obtained are given in the table If the independent coordinates (Northing, Easting) of station $P$ are $(400\:m,200\:m)$, the independent coordinates (in $m$) of station $T$, are $194.7,370.1$ $205.3,429.9$ $394.7,170.1$ $405.3,229.9$
An open traverse PQRST is surveyed using theodolite and the consecutive coordinates obtained are given in the tableIf the independent coordinates (Northing, Easting) of s...
go_editor
5.3k
points
go_editor
asked
Feb 27, 2020
Geomatics Engineering
gate2020-ce-1
geomatics-engineering
traversing-survey
+
–
0
votes
0
answers
11
GATE Civil 2021 Set 1 | Question: 55
Traversing is carried out for a closed traverse $\text{PQRS}$. The internal angles at vertices $\text{P, Q, R and S}$ are measured as $92^{\circ},68^{\circ},123^{\circ}$ and $77^{\circ}$, respectively. If fore bearing of line $\text{PQ}$ is $27^{\circ}$, fore bearing of line $\text{RS}$ (in degrees, in integer) is ___________________
Traversing is carried out for a closed traverse $\text{PQRS}$. The internal angles at vertices $\text{P, Q, R and S}$ are measured as $92^{\circ},68^{\circ},123^{\circ}$ ...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Geomatics Engineering
gatecivil-2021-set1
numerical-answers
traversing-and-triangulation-survey
+
–
0
votes
0
answers
12
GATE2019 CE-1: 10
The interior angles of four triangles are given below: ... avoided in Triangulation surveys? $\text{Both P and R}$ $\text{Both Q and R}$ $\text{Both P and S}$ $\text{Both Q and S}$
The interior angles of four triangles are given below:$$\begin{array}{|l|l|}\hline \textbf{Triangle} & \textbf{Interior Angles} \\\hline \text{P} & 85^{\circ},50^{\circ...
Arjun
13.0k
points
Arjun
asked
Feb 14, 2019
Geomatics Engineering
gate2019-ce-1
geomatics-engineering
triangulation-survey
+
–
0
votes
0
answers
13
GATE2017 CE-2-25
While aligning a hill road with a ruling gradient $6\%$, a horizontal curve of radius $50 \: m$ is encountered. The grade compensation (in percentage, up to two decimal places) to be provided for this case would be _________
While aligning a hill road with a ruling gradient $6\%$, a horizontal curve of radius $50 \: m$ is encountered. The grade compensation (in percentage, up to two decimal p...
gatecse
4.0k
points
gatecse
asked
Aug 7, 2019
Geomatics Engineering
gate2017-ce-2
numerical-answers
geomatics-engineering
horizontal-curve
+
–
0
votes
0
answers
14
GATE2014-1-55
Group I lists tool/instrument while Group II lists the method of surveying. Match the tool/instrument with the corresponding method of surveying. ... $P-2; Q-4; R-3; S-1$ $P-1; Q-2; R-4; S-3$ $P-3; Q-1; R-2; S-4$
Group I lists tool/instrument while Group II lists the method of surveying. Match the tool/instrument with the corresponding method of surveying.$\begin{array}{ll} \text...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 25, 2018
Geomatics Engineering
gate2014-ce-1
geomatics-engineering
principles-of-surveying
+
–
0
votes
0
answers
15
GATE2015-2-55
Two Pegs A and B were fixed on opposite banks of a $50$ m wide river. The level was set up at A and the staff readings on Pegs A and B were observed as $1.350$ m and $1.550$ m, respectively. Thereafter the instrument was shifted and set up at B. The staff reading on Pegs B and ... m and $0.550$ m, respectively. If the R.L. of Peg A is $100.200$ m, the R.L. (in m) of Peg B is _______.
Two Pegs A and B were fixed on opposite banks of a $50$ m wide river. The level was set up at A and the staff readings on Pegs A and B were observed as $1.350$ m and $1.5...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Geomatics Engineering
gate2015-ce-2
numerical-answers
geomatics
pegs
staff-readings
distance-measurement
+
–
0
votes
0
answers
16
GATE Civil 2021 Set 2 | Question: 5
In general, the $\text{CORRECT}$ sequence of surveying operations is Field observations $\rightarrow$ Reconnaissance $\rightarrow$ Data analysis $\rightarrow$ Map making Data analysis $\rightarrow$ Reconnaissance $\rightarrow$ Field ... $\rightarrow$ Data analysis $\rightarrow$ Field observations $\rightarrow$ Map making
In general, the $\text{CORRECT}$ sequence of surveying operations isField observations $\rightarrow$ Reconnaissance $\rightarrow$ Data analysis $\rightarrow$ Map makin...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Geomatics Engineering
gatecivil-2021-set2
principles-of-surveying
+
–
0
votes
0
answers
17
GATE2015-2-25
The combined correction due to curvature and refraction (in m) for a distance of $1$ km on the surface of Earth is: $0.0673$ $0.673$ $7.63$ $0.763$
The combined correction due to curvature and refraction (in m) for a distance of $1$ km on the surface of Earth is:$0.0673$$0.673$$7.63$$0.763$
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Geomatics Engineering
gate2015-ce-2
geomatics-engineering
principles-of-surveying
+
–
0
votes
0
answers
18
GATE Civil 2021 Set 1 | Question: 17
Which of the following is/are correct statement$\text{(s)}$? Back Bearing of a line is equal to Fore Bearing $\pm 180^{\circ}$ If the whole circle bearing of a line is $270^{\circ}$ ... line In the case of fixed hair stadia tachometry, the staff intercept will be larger, when the staff is held nearer to the observation point
Which of the following is/are correct statement$\text{(s)}$?Back Bearing of a line is equal to Fore Bearing $\pm 180^{\circ}$If the whole circle bearing of a line is $270...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Geomatics Engineering
gatecivil-2021-set1
surveying
distance-angle-measurement
+
–
0
votes
0
answers
19
GATE2018 CE-2: 55
An aerial photographer of a terrain having an average elevation of $1400$ m is taken at a scale of $1:7500$. The focal length of the camera is $15$ cm. The altitude of the flight above mean sea level (in m, up to one decimal place) is ______
An aerial photographer of a terrain having an average elevation of $1400$ m is taken at a scale of $1:7500$. The focal length of the camera is $15$ cm. The altitude of th...
gatecse
4.0k
points
gatecse
asked
Feb 17, 2018
Geomatics Engineering
gate2018-ce-2
numerical-answers
geomatics-engineering
photogrammetry
+
–
0
votes
0
answers
20
GATE2019 CE-1: 35
A survey line was measured to be $285.5 \: m$ with a tape having a nominal length of $30 \: m$. On checking, the true length of the tape was found to be $0.05 \: m$ too short. If the line lay on a slope of $1$ in $10$, the reduced length (horizontal length) of the line for plotting of survey work would be $283.6 \: m$ $284.5 \: m$ $285.0 \: m$ $285.6 \: m$
A survey line was measured to be $285.5 \: m$ with a tape having a nominal length of $30 \: m$. On checking, the true length of the tape was found to be $0.05 \: m$ too ...
Arjun
13.0k
points
Arjun
asked
Feb 14, 2019
Geomatics Engineering
gate2019-ce-1
geomatics-engineering
principles-of-surveying
distance-measurement
+
–
0
votes
0
answers
21
GATE2015-2-54
The bearings of two inaccessible stations, $S_1$ (Easting $500$ m, Northing $500$ m) and $S_2$ (Easting $600$ m, Northing $450$ m) from a station $S_3$ were observed as $225^{\circ}$ and $153^{\circ}\: 26’$ respectively. The independent Easting (in m) of station $S_3$ is: $450.000$ $570.710$ $550.000$ $650.000$
The bearings of two inaccessible stations, $S_1$ (Easting $500$ m, Northing $500$ m) and $S_2$ (Easting $600$ m, Northing $450$ m) from a station $S_3$ were observed as $...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Geomatics Engineering
gate2015-ce-2
geomatics-engineering
bearings
independent-easting
+
–
0
votes
0
answers
22
GATE2015-1-54
In a survey work, three independent angles $X, Y$ and $Z$ were observed with weights $W_X, W_Y, W_Z$,respectively. The weight of the sum of angles $X, Y$ and $Z$ is given by: $1/ \big( \dfrac{1}{W_X} + \dfrac{1}{W_Y} + \dfrac{1}{W_Z} \big) \\$ $\big( \dfrac{1}{W_X} + \dfrac{1}{W_Y} + \dfrac{1}{W_Z} \big) \\$ $W_X +W_Y+W_Z \\$ $W_X^2 +W_Y^2+W_Z^2$
In a survey work, three independent angles $X, Y$ and $Z$ were observed with weights $W_X, W_Y, W_Z$,respectively. The weight of the sum of angles $X, Y$ and $Z$ is given...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Geomatics Engineering
gate2015-ce-1
numerical-answers
geomatics-engineering
surveying
distance-and-angle-measurement
+
–
0
votes
0
answers
23
GATE2017 CE-2-38
Two towers, A and B, standing vertically on a horizontal ground, appear in a vertical aerial photograph as shown in the figure. The length of the image of the tower A on the photograph is $1.5$ cm and the tower B is $2.0$ cm. The distance of the top tower A ( ... point $p$ of the photograph. If the height of the tower B is $80$ m, the height (in meters) of the tower A is ________
Two towers, A and B, standing vertically on a horizontal ground, appear in a vertical aerial photograph as shown in the figure.The length of the image of the tower A on t...
gatecse
4.0k
points
gatecse
asked
Aug 7, 2019
Geomatics Engineering
gate2017-ce-2
numerical-answers
geomatics-engineering
photogrammetry
+
–
0
votes
0
answers
24
GATE2016-2-24
The reduced bearing of a $10 \: m$ long line is $N 30^{\circ}E$. The departure of the line is $10.00 \: m$ $8.66 \: m$ $7.52 \: m$ $5.00 \: m$
The reduced bearing of a $10 \: m$ long line is $N 30^{\circ}E$. The departure of the line is$10.00 \: m$$8.66 \: m$$7.52 \: m$$5.00 \: m$
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 27, 2018
Geomatics Engineering
gate2016-ce-2
geomatics-engineering
distance-and-angle-measurement
+
–
0
votes
0
answers
25
GATE2016-2-23
Optimal flight planning for a photogrammetric survey should be carried out considering only side-lap only end-lap either side-lap or end-lap both side-lap as well as end-lap
Optimal flight planning for a photogrammetric survey should be carried out consideringonly side-laponly end-lapeither side-lap or end-lapboth side-lap as well as end-lap
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 27, 2018
Geomatics Engineering
gate2016-ce-2
geomatics-engineering
photogrammetric
+
–
0
votes
0
answers
26
GATE2017 CE-2-22
The VPI (vertical point of section) is $100$ m away (when measured along the horizontal) from the VPC (vertical point of curvature). If the vertical is parabolic, the length of the curve (in meters and measured along the horizontal) is _______
The VPI (vertical point of section) is $100$ m away (when measured along the horizontal) from the VPC (vertical point of curvature). If the vertical is parabolic, the len...
gatecse
4.0k
points
gatecse
asked
Aug 7, 2019
Geomatics Engineering
gate2017-ce-2
numerical-answers
geomatics-engineering
vertical-curve
+
–
0
votes
0
answers
27
GATE2016-1-25
The staff reading taken on a workshop floor using a level is $0.645$ m. The inverted staff reading taken to the bottom of a beam is $2.960$ m. The reduced level of the floor is $40.500$ m. The reduced level (expressed in m) of the bottom of the beam is $44.105$ $43.460$ $42.815$ $41.145$
The staff reading taken on a workshop floor using a level is $0.645$ m. The inverted staff reading taken to the bottom of a beam is $2.960$ m. The reduced level of the fl...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 27, 2018
Geomatics Engineering
gate2016-ce-1
staff-readings
geomatics-engineering
distance-and-angle-measurement
+
–
0
votes
0
answers
28
GATE2017 CE-1: 19
The number of spectral bands in the Enhanced Thematic Mapper sensor on the remote sensing satellite Landsat-$7$ is: $64$ $10$ $8$ $15$
The number of spectral bands in the Enhanced Thematic Mapper sensor on the remote sensing satellite Landsat-$7$ is:$64$$10$$8$$15$
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Geomatics Engineering
gate2017-ce-1
geomatics-engineering
photogrammetry
remote-sensing
+
–
0
votes
0
answers
29
GATE2018 CE-2: 36
A level instrument at a height of $1.320$ m has been placed at a station having a Reduced Level (RL) of $112.565$ m. The instrument reads $-2.835$ m on a levelling staff held at the bottom of a bridge deck. The RL (in m) of the bottom of the bridge deck is $116.720$ $116.080$ $114.080$ $111.050$
A level instrument at a height of $1.320$ m has been placed at a station having a Reduced Level (RL) of $112.565$ m. The instrument reads $-2.835$ m on a levelling staff ...
gatecse
4.0k
points
gatecse
asked
Feb 17, 2018
Geomatics Engineering
gate2018-ce-2
geomatics-engineering
total-station
+
–
0
votes
0
answers
30
GATE2014-2-25
The survey carried out to delineate natural features, such as hills, rivers, forests and man-made features, such as towns, village, buildings, roads, transmission line, and canals is classified as engineering survey geological survey land survey topographic survey
The survey carried out to delineate natural features, such as hills, rivers, forests and man-made features, such as towns, village, buildings, roads, transmission line, a...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 25, 2018
Geomatics Engineering
gate2014-ce-2
principles-of-surveying
geomatics-engineering
+
–
0
votes
0
answers
31
GATE Civil 2013 | Question: 46
Following bearings are observed while traversing with a compass ... fore bearing of line BC will be $48^{\circ} 15'$ $50^{\circ} 15'$ $49^{\circ} 45'$ $48^{\circ} 45'$
Following bearings are observed while traversing with a compass$\begin{array}{rrr} \text{Line} & \text{Fore Bearing} & \text{back Bearing} \\ AB & 126^{\circ} 45’ & 308...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 25, 2018
Geomatics Engineering
gate2013-ce
geomatics-engineering
traversing
+
–
0
votes
0
answers
32
GATE2017 CE-2-13
The method of orientation used, when the plane table occupies a position not yet located on the map, is called as traversing radiation levelling resection
The method of orientation used, when the plane table occupies a position not yet located on the map, is called astraversingradiationlevellingresection
gatecse
4.0k
points
gatecse
asked
Aug 7, 2019
Geomatics Engineering
gate2017-ce-2
maps
geomatics-engineering
traversing
+
–
0
votes
0
answers
33
GATE2020-CE-1-21
A road in a hilly terrain is to be laid at a gradient of $4.5\%$. A horizontal curve of radius $100\:m$ is laid at a location on this road. Gradient needs to be eased due to combination of curved horizontal and vertical profiles of the road. As per IRC, the compensated gradient (in $\%$, round off to one decimal place), is _______.
A road in a hilly terrain is to be laid at a gradient of $4.5\%$. A horizontal curve of radius $100\:m$ is laid at a location on this road. Gradient needs to be eased due...
go_editor
5.3k
points
go_editor
asked
Feb 27, 2020
Geomatics Engineering
gate2020-ce-1
horizontal-and-vertical-curves
numerical-answers
+
–
0
votes
0
answers
34
GATE2014-1-25
The Reduced Levels (RLs) of the points P and Q are $+49.600$ m and $+51.870$ respectively. Distance PQ is $20$ m. The distance (in m from P) at which the $+51.000$ m contour cuts the line PQ is $15.00$ $12.33$ $3.52$ $2.27$
The Reduced Levels (RLs) of the points P and Q are $+49.600$ m and $+51.870$ respectively. Distance PQ is $20$ m. The distance (in m from P) at which the $+51.000$ m con...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 25, 2018
Geomatics Engineering
gate2014-ce-1
geomatics-engineering
levelling
+
–
0
votes
0
answers
35
GATE Civil 2012 | Question: 47
The horizontal distance between two stations P and Q is $100 \: m$. The vertical angles from P and Q to the top of a vertical tower at $T$ are $3^{\circ}$ and $5^{\circ}$ above horizontal, respectively. The vertical angles from P and Q to the ... earth's curvature and atmospheric refraction, the height (in m) of the tower is $6.972$ $12.387$ $12.540$ $128.745$
The horizontal distance between two stations P and Q is $100 \: m$. The vertical angles from P and Q to the top of a vertical tower at $T$ are $3^{\circ}$ and $5^{\circ}$...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 25, 2018
Geomatics Engineering
gate2012-ce
geomatics-engineering
horizontal-and-vertical-curves
+
–
0
votes
0
answers
36
GATE2020 CE-2-38
A theodolite was set up at a station $P$. The angle of depression to a vane $2\ m$ above the food of a staff held at another station $Q$ was $45^\circ$. The horizontal distance between stations $P$ and $Q$ is $20\: m$. The staff reading at a benchmark $S$ ... to curvature and refraction, the $RL$ of the station $Q\: \text{(in m)},$ is $413.050$ $413.955$ $431.050$ $435.955$
A theodolite was set up at a station $P$. The angle of depression to a vane $2\ m$ above the food of a staff held at another station $Q$ was $45^\circ$. The horizontal di...
go_editor
5.3k
points
go_editor
asked
Feb 13, 2020
Geomatics Engineering
gate2020-ce-2
geomatics-engineering
total-station
horizontal-curves
errors-and-adjustments
+
–
0
votes
0
answers
37
GATE Civil 2021 Set 2 | Question: 25
A horizontal angle $\theta$ ... $\theta$ ( in degree, $\textit{round off to two decimal places}$is _________________
A horizontal angle $\theta$ is measured by four different surveyors multiple times and the values reported are given below.$$\begin{array}{|lc|cI|cI|cI|cI|cI|}\hline&\tex...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Geomatics Engineering
gatecivil-2021-set2
numerical-answers
distance-angle-measurement
+
–
0
votes
0
answers
38
GATE2018 CE-1: 36
A square area (on the surface of the earth) with side $100$ m and uniform height, appears as $1 \: cm^2$ on a vertical aerial photograph. The topographic map shows that a contour of $650$ m passes through the area. If focal length of the camera lens is $150$ mm, the height from which the aerial photograph was taken, is $800$ m $1500$ m $2150$ m $3150$ m
A square area (on the surface of the earth) with side $100$ m and uniform height, appears as $1 \: cm^2$ on a vertical aerial photograph. The topographic map shows that a...
gatecse
4.0k
points
gatecse
asked
Feb 17, 2018
Geomatics Engineering
gate2018-ce-1
geomatics-engineering
photo-grammetry
+
–
0
votes
0
answers
39
GATE2017 CE-1: 35
The observed bearings of a traverse are given below: ... $R$ Only $S$ $R$ and $S$ $P$ and $Q$
The observed bearings of a traverse are given below:$\begin{array}{|c|c|c|c|c|} \hline \text{Line} & \text{Bearing} & {} & \text{Line} & \text{Bearing} \\ \hline PQ & 46^...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Geomatics Engineering
gate2017-ce-1
geomatics-engineering
traversing
+
–
0
votes
0
answers
40
GATE2014-1-54
A levelling is carried out to establishing the Reduced Levels (RL) of point R with respect to the Bench Mark (BM) at P. The staff readings taken are given below: ... $RL$ of $P$ is $+100.000$ m, then $RL$ (in m) of $R$ is $103.355$ $103.155$ $101.455$ $100.355$
A levelling is carried out to establishing the Reduced Levels (RL) of point R with respect to the Bench Mark (BM) at P. The staff readings taken are given below:$\begin{a...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 25, 2018
Geomatics Engineering
gate2014-ce-1
levelling
geomatics-engineering
+
–
Page:
1
2
next »
GO Civil
Email or Username
Show
Hide
Password
I forgot my password
Remember
Log in
Register