Dark Mode

Recent activity by makhdoom ghaya

1 answer

1

GATE Civil 2022 Set 2 | GA Question: 10
An ant walks in a straight line on a plane leaving behind a trace of its movement. The initial position of the ant is at point $\text{P}$ facing east. The ant first turns $72^{\circ} $ anticlockwise at $\text{P},$ and then does the following two steps ... $144^{\circ}$ clockwise. The pattern made by the trace left behind by the ant is A. B. C. D.

edited in Analytical Aptitude Jul 5, 2022

0 answers

2

GATE Civil 2022 Set 2 | Question: 28
For the square steel beam cross-section shown in the figure, the shape factor about $z - z$ axis is $S$ and the plastic moment capacity is $M_{p}.$ Consider yield stress $f_{y} = 250 \; \text{MPa}$ and $a = 100 \; \text{mm}.$ The values of $S$ and $M_{p}$ (rounded-off to one ... $S = 1.5, M_{p} = 58.9 \; \text{kN-m}$ $S = 1.5, M_{p} = 100.2 \; \text{kN-m}$

edited in Others Jul 5, 2022

0 answers

3

GATE Civil 2022 Set 2 | Question: 8
Stresses acting on an infinitesimal soil element are shown in the figure (with $\sigma_{z} > \sigma_{x}$). The major and minor principal stresses are $\sigma_{1}$ and $\sigma_{3},$ respectively. Considering the compressive stresses as positive, which one of the following ... $\tan^{-1} \left( \frac{\tau_{zx}} {\sigma_{1} + \sigma_{3}} \right)$

edited in Others Jul 5, 2022

0 answers

4

GATE Civil 2022 Set 1 | Question: 40
The plane truss shown in the figure is subjected to an external force $P$. It is given that $P = 70\; kN$, $a = 2\; m$, and $b = 3\; m$. The magnitude (absolute value) of force (in $kN$) in member $EF$ is ______________. (round off to the nearest integer)

edited in Others Jul 3, 2022

0 answers

5

GATE Civil 2022 Set 1 | Question: 55
For the dual-wheel carrying assembly shown in the figure, $P$ is the load on each wheel, $a$ is the radius of the contact area of the wheel, $s$ is the spacing between the wheels, and $d$ is the clear distance between the wheels. ... round off to one decimal place) (Consider the influence angle to be $45^{\circ}$ for the linear dispersion of stress with depth)

edited in Others Jul 3, 2022

0 answers

6

GATE Civil 2022 Set 1 | Question: 36
A horizontal force of $\text{P kN}$ is applied to a homogeneous body of weight $25$ $\text{kN}$, as shown in the figure. The coefficient of friction between the body and the floor is $0.3$. Which of the following statement(s) is/are correct? ... the body never occurs. No motion occurs for $P\leq 6$ $\text{kN}$. The motion of the body will occur by sliding only

edited in Others Jul 3, 2022

1 answer

7

GATE Civil 2022 Set 1 | GA Question: 10
Consider a cube made by folding a single sheet of paper of appropriate shape. The interior faces of the cube are all blank. However, the exterior faces that are not visible in the above view may not be blank. Which one of the following represents a possible unfolding of the cube? A. B. C. D.

edited in Spatial Aptitude Jul 3, 2022

1 answer

8

GATE Civil 2022 Set 1 | GA Question: 5
In the following diagram, the point $\text{R}$ is the center of the circle. The lines $\text{PQ}$ and $\text{ZV}$ are tangential to the circle. The relation among the areas of the squares, $\text{PXWR, RUVZ}$ and $\text{SPQT}$ is Area of $\text{SPQT}$ ... $\text{RUVZ}$ Area of $\text{PXWR}$ = Area of $\text{RUVZ}$ - Area of $\text{SPQT}$

edited in Quantitative Aptitude Jul 2, 2022