Recent questions tagged simple-stress-and-strain-relationship

Let the state of stress at a point in a body be the difference of two plane states of stress shown in the figure. Consider all the possible planes perpendicular to the $x...

Strain hardening of structural steel meansexperiencing higher stress than yield stress with increased deformationstrengthening steel member externally for reducing strain...

Refer the truss as shown in the figure (not to scale).If load, $F=10\sqrt{3}\text{ kN}$, moment of inertia, $I=8.33\times 10^{6}\text{ mm}^4$, area of cross-section, $A=1...

An element is subjected to biaxial normal tensile strains of $0.0030$ and $0.0020$. The normal strain in the plane of maximum shear strain isZero$0.0010$$0.0025$$0.0050$

When a specimen of $M25$ concrete is loaded to a stress level of $12.5 \: MPa$, a strain of $500 \times 10^{-6}$ is recorded. If this load is allowed to stand for a long ...

A simply supported beam is subjected to a uniformly distributed load. Which one of the following statements is true?Maximum or minimum shear force occurs where the curvat...

Group I contains representative stress-strain curves as shown in the figure, while Group II gives the list of materials. Match the stress-strain curves with the correspon...

The ‘plane section remains plane’ assumption in bending theory impliesstrain profile is linearstress profile is linearboth strain and strain profiles are linearshear defo...

A plate in equilibrium is subjected to uniform stresses along its edges with magnitude $\sigma_{xx} = 30 MPa$ and $\sigma_{yy} = 50 MPa$ as shown in the figure.The Young'...