GO Civil
Login
Register
Dark Mode
Brightness
Profile
Edit Profile
Messages
My favorites
My Updates
Logout
Recent questions tagged structural-engineering
0
votes
0
answers
81
GATE2017 CE-1: 4
An elastic bar of length $L$, uniform cross sectional area $A$, coefficient of thermal expansion $\alpha$, and Young's modulus $E$ is fixed at the two ends. The temperature of the bar is increased by $T$, resulting in an axial stress $\sigma$. Keeping all other parameters unchanged ... , the axial stress would be $\sigma$ $2 \: \sigma$ $0.5 \: \sigma$ $0.25 \: \alpha \: \sigma$
An elastic bar of length $L$, uniform cross sectional area $A$, coefficient of thermal expansion $\alpha$, and Young’s modulus $E$ is fixed at the two ends. The tempera...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Engineering Mechanics
gate2017-ce-1
structural-engineering
axial-stress
engineering-mechanics
+
–
0
votes
0
answers
82
GATE2017 CE-1: 29
A planar truss tower structure is shown in the figure. Consider the following statements about the external and internal determinacies of the truss. Externally Determinate External Static Indeterminacy $=1$ External Static Indeterminacy $=2$ Internally Determinate Internal Static Indeterminacy $=1$ ... S-False; T-False; U- True P-True; Q- True; R-False; S-True; T-False; U- True
A planar truss tower structure is shown in the figure.Consider the following statements about the external and internal determinacies of the truss.Externally DeterminateE...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Analysis
gate2017-ce-1
structural-analysis
structural-engineering
analysis-of-trusses
+
–
0
votes
0
answers
83
GATE2017 CE-1: 38
A pre-tensioned rectangular concrete beam $150$ mm wide and $300$ mm depth is prestressed with three straight tendons, each having a cross-sectional are of $50 \: mm^2$, to an initial stress of $1200 \: N/mm^2$. The tendons are located at $100$ ... is $6$, the loss of prestressing force (in kN, up to one decimal place) due to the elastic deformation of concrete only is _________.
A pre-tensioned rectangular concrete beam $150$ mm wide and $300$ mm depth is prestressed with three straight tendons, each having a cross-sectional are of $50 \: mm^2$, ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Concrete Structures
gate2017-ce-1
numerical-answers
concrete-structures
structural-engineering
concrete-beam
+
–
0
votes
0
answers
84
GATE2017 CE-1: 39
Consider the stepped bar made with a linear elastic material and subjected to an axial load of $1$ kN, as shown in the figure. Segments $1$ and $2$ have cross-sectional area of $100 \: mm^2$ and $60 \: mm^2$, Young's modulus of $2 \times 10^5$ MPa ... mm and $900$ mm, respectively. The strain energy (in N-mm, up to one decimal place) in the bar due to the axial load is __________
Consider the stepped bar made with a linear elastic material and subjected to an axial load of $1$ kN, as shown in the figure.Segments $1$ and $2$ have cross-sectional ar...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Engineering
gate2017-ce-1
numerical-answers
axial-load
strain-energy
structural-engineering
+
–
0
votes
0
answers
85
GATE2017 CE-1: 40
The value of $M$ in the beam ABC shown in the figure is such that the joint B does not rotate. The value of support reaction (in kN) at B should be equal to _________.
The value of $M$ in the beam ABC shown in the figure is such that the joint B does not rotate.The value of support reaction (in kN) at B should be equal to _________.
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Analysis
gate2017-ce-1
numerical-answers
structural-engineering
structural-analysis
analysis-of-beams
+
–
0
votes
0
answers
86
GATE2017 CE-1: 41
Consider the beam ABCD shown in the figure. For a moving concentrated load of $50$ kN on the beam, the magnitude of the maximum bending moment (in kN-m) obtained at the support C will be equal to ________.
Consider the beam ABCD shown in the figure.For a moving concentrated load of $50$ kN on the beam, the magnitude of the maximum bending moment (in kN-m) obtained at the su...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Solid Mechanics
gate2017-ce-1
numerical-answers
solid-mechanics
structural-engineering
bending-moment-in-beam
+
–
0
votes
0
answers
87
GATE2017 CE-1: 42
Consider two axially loaded columns, namely, $1$ and $2$, made of a linear elastic material with Young's modulus $2 \times 10^5$ MPa, square cross-section with side $10$ mm, and length $1$ m. For column $1$, one end is fixed and the other end is free ... 's theory, the ratio (up to one decimal place) of the buckling load of Column $2$ to the buckling load of Column $1$ is ________
Consider two axially loaded columns, namely, $1$ and $2$, made of a linear elastic material with Young’s modulus $2 \times 10^5$ MPa, square cross-section with side $10...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Engineering Mechanics
gate2017-ce-1
numerical-answers
engineering-mechanics
structural-engineering
euler's-equation
+
–
0
votes
0
answers
88
GATE2017 CE-1: 43
A column is subjected to a load through a bracket as shown in the figure. The resultant force (in kN, up to one decimal place) in the bolt $1$ is _______
A column is subjected to a load through a bracket as shown in the figure.The resultant force (in kN, up to one decimal place) in the bolt $1$ is _______
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Steel Structures
gate2017-ce-1
numerical-answers
structural-engineering
resultant-force
steel-structures
bracket-connection
+
–
0
votes
0
answers
89
GATE2017 CE-1: 44
A particle of mass $2$ kg is travelling at a velocity of $1.5$ m/s. A force $f(t) = 3t^2$ (in N) is applied to it in the direction of motion for a duration of $2$ seconds, where $t$ denotes time in seconds. The velocity (in m/s, up to one decimal place) of the particle immediately after the removal of the force is _______.
A particle of mass $2$ kg is travelling at a velocity of $1.5$ m/s. A force $f(t) = 3t^2$ (in N) is applied to it in the direction of motion for a duration of $2$ seconds...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Engineering Mechanics
gate2017-ce-1
numerical-answers
structural-engineering
engineering-mechanics
internal-forces-in-structures
+
–
0
votes
0
answers
90
GATE2017 CE-1: 45
The activity details of a project are given below: ... The estimated minimum time (in days) for the completion of the project will be __________
The activity details of a project are given below:$$\begin{array}{|c|c|c|} \hline \text{Activity} & \text{Depends on} & \text{Duration (in days)} \\ \hline P & \dots & 6 ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Construction Materials and Management
gate2017-ce-1
numerical-answers
construction-materials-and-management
structural-engineering
project-planning
cost-estimation
+
–
0
votes
0
answers
91
GATE2015-2-6
A horizontal beam $ABC$ is loaded as shown in the figure below. The distance of the point of contraflexure from end $A$ (in m) is _________
A horizontal beam $ABC$ is loaded as shown in the figure below. The distance of the point of contraflexure from end $A$ (in m) is _________
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Analysis
gate2015-ce-2
numerical-answers
structural-engineering
structural-analysis
analysis-of-beams
+
–
0
votes
0
answers
92
GATE2015-2-7
For the plane stress situation shown in the figure, the maximum shear stress and the plane on which it acts are: $-50$ MPa, on a plane $45^{\circ}$ clockwise w.r.t. $x$-axis $-50$ MPa, on a plane $45^{\circ}$ anti-clockwise w.r.t. $x$-axis $50$ MPa at all orientations Zero, at all orientations
For the plane stress situation shown in the figure, the maximum shear stress and the plane on which it acts are:$-50$ MPa, on a plane $45^{\circ}$ clockwise w.r.t. $x$-ax...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Solid Mechanics
gate2015-ce-2
solid-mechanics
structural-engineering
shear-stress
+
–
0
votes
0
answers
93
GATE2015-2-8
A guided support as shown in the figure below is represented by three springs (horizontal, vertical and rotational) with stiffness $k_x, k_y$ and $k_{\theta}$ respectively. The limiting values of $k_x, k_y$ and $k_{\theta}$ are: $\infty, 0, \infty$ $\infty, \infty, \infty$ $0, \infty, \infty$ $\infty, \infty, 0$
A guided support as shown in the figure below is represented by three springs (horizontal, vertical and rotational) with stiffness $k_x, k_y$ and $k_{\theta}$ respectivel...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Analysis
gate2015-ce-2
structural-engineering
structural-analysis
stiffness
+
–
0
votes
0
answers
94
GATE2015-2-9
A column of size $450 \: mm \times 600\: mm $ has unsupported length of $3.0$ m and is braced against side sway in both directions. According to $IS \: 456:2000$, the minimum eccentricities (in mm) with respect to major and minor principal axes are: $20.0$ and $20.0$ $26.0$ and $21.0$ $26.0$ and $20.0$ $21.0$ and $15.0$
A column of size $450 \: mm \times 600\: mm $ has unsupported length of $3.0$ m and is braced against side sway in both directions. According to $IS \: 456:2000$, the min...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Concrete Structures
gate2015-ce-2
concrete-structures
structural-engineering
design-of-columns
+
–
0
votes
0
answers
95
GATE2015-2-10
Prying forces are shearing forces on the bolts because of the joints tensile forces due to the flexibility of connected parts bending forces on the bolts because of the joints forces due the friction between connected parts
Prying forces areshearing forces on the bolts because of the jointstensile forces due to the flexibility of connected partsbending forces on the bolts because of the join...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Steel Structures
gate2015-ce-2
structural-engineering
steel-structures
bolts
+
–
0
votes
0
answers
96
GATE2015-2-11
A steel member $’ M’$ has reversal of stress due to live loads, whereas another member $’N’$ has reversal of stress due to wind load. As per $IS \: 800: 2007$, the maximum slenderness ratio permitted is: less for member $’ M’$ than that of member $’ N’$ more for member $’ M’$ than that of member $’N’$ same for both members not specified in the Code
A steel member $’ M’$ has reversal of stress due to live loads, whereas another member $’N’$ has reversal of stress due to wind load. As per $IS \: 800: 2007$, th...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Steel Structures
gate2015-ce-2
steel-structures
structural-engineering
slendemess-ratio
+
–
0
votes
0
answers
97
GATE2015-2-30
In a system, two connected rigid bars $AC$ and $BC$ are identical length, $L$ with pin supports at $A$ and $B$. The bars are interconnected at $C$ by a frictionless hinge. The rotation of the hinge is restrained by a rotational spring of stiffness, $k$. The system initially assumes a straight ... at $C$ is: $\dfrac{PL}{4k} \\$ $\dfrac{PL}{2k} \\$ $\dfrac{P}{4k} \\$ $\dfrac{Pk}{4L}$
In a system, two connected rigid bars $AC$ and $BC$ are identical length, $L$ with pin supports at $A$ and $B$. The bars are interconnected at $C$ by a frictionless hinge...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Engineering Mechanics
gate2015-ce-2
engineering-mechanics
structural-engineering
stiffness
rigid-body
+
–
0
votes
0
answers
98
GATE2015-2-31
A simply supported reinforced concrete beam of length $10$ m sags while undergoing shrinkage. Assuming a uniform curvature of $0.004 m^{-1}$ along the span, the maximum deflection (in m) of the beam at mid-span is __________.
A simply supported reinforced concrete beam of length $10$ m sags while undergoing shrinkage. Assuming a uniform curvature of $0.004 m^{-1}$ along the span, the maximum d...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Concrete Structures
gate2015-ce-2
numerical-answers
concrete-structures
structural-engineering
concrete-beams
deign-of-beams
+
–
0
votes
0
answers
99
GATE2015-2-32
A steel strip of length $L=200$ mm is fixed at end $A$ and rests at $B$ on a vertical spring of stiffness, $k=2 \: N/mm$. The steel strip is $5$ mm wide and $10$ mm thick. A vertical load, $P=50$ N is applied at $B$, as shown in the figure. Considering $E=200$ GPa, the force (in N) developed in the spring is ________.
A steel strip of length $L=200$ mm is fixed at end $A$ and rests at $B$ on a vertical spring of stiffness, $k=2 \: N/mm$. The steel strip is $5$ mm wide and $10$ mm thick...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Steel Structures
gate2015-ce-2
numerical-answers
steel-structures
structural-engineering
steel-strip
+
–
0
votes
0
answers
100
GATE2015-2-33
A simply supported beam AB of span, $L=24$ m is subjected to two wheel loads acting at a distance, $d=5$ m apart as shown in the figure below. Each wheel transmits a load, $P=3$ kN and may occupy any position along the beam. If the beam is an $I$-section having section modulus, $S=16.2 \:cm^3$, the maximum bending stress (in GPa) due to the wheel loads is _______.
A simply supported beam AB of span, $L=24$ m is subjected to two wheel loads acting at a distance, $d=5$ m apart as shown in the figure below. Each wheel transmits a load...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Analysis
gate2015-ce-2
numerical-answers
structural-engineering
beam
structural-analysis
analysis-of-beams
+
–
0
votes
0
answers
101
GATE2015-2-34
According to the concept of Limit State Design as per $IS \: 456:2000$, the probability of failure of a structure is ______.
According to the concept of Limit State Design as per $IS \: 456:2000$, the probability of failure of a structure is ______.
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Steel Structures
gate2015-ce-2
numerical-answers
steel-structures
structural-engineering
limit-state-design
+
–
0
votes
0
answers
102
GATE2015-2-35
In a pre-stressed concrete beam section shown in the figure, the net loss is $10 \%$ and the final pre-stressing force applied at $X$ is $750$ kN. The initial fiber stresses (in $N/mm^2$) at the top and bottom of the beam were: $4.166$ and $20.833$ $ – 4.166$ and $ – 20.833$ $4.166$ and $ – 20.833$ $ – 4.166$ and $20.833$
In a pre-stressed concrete beam section shown in the figure, the net loss is $10 \%$ and the final pre-stressing force applied at $X$ is $750$ kN. The initial fiber stres...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Concrete Structures
gate2015-ce-2
concrete-structures
structural-engineering
pre-stressed-concrete
+
–
0
votes
0
answers
103
GATE2015-2-36
A fixed end beam is subjected to a load, W at $1/3$ rd span from the left support as shown in the figure. The collapse load of the beam is: $16.5 M_p/L$ $15.5 M_p/L$ $15.0 M_p/L$ $16.0 M_p/L$
A fixed end beam is subjected to a load, W at $1/3$ rd span from the left support as shown in the figure. The collapse load of the beam is:$16.5 M_p/L$$15.5 M_p/L$$15.0 M...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Steel Structures
gate2015-ce-2
steel-structures
structural-engineering
beam
+
–
0
votes
0
answers
104
GATE2015-2-53
In Marshall method of mix design, the coarse aggregate, fine aggregate, fines and bitumen having respective values of specific gravity $2.60, 2.70, 2.65$ and $1.01$, are mixed in the relative proportions ($\%$ by weight) of $55.0, \: 35.8, \: 3.7$ and $5.5$ respectively. The ... the mix respectively are: $2.42$ and $2.63$ $2.42$ and $2.78$ $2.42$ and $2.93$ $2.64$ and $2.78$
In Marshall method of mix design, the coarse aggregate, fine aggregate, fines and bitumen having respective values of specific gravity $2.60, 2.70, 2.65$ and $1.01$, are ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Construction Materials and Management
gate2015-ce-2
construction-materials-and-management
mix-design
marshall-method
structural-engineering
+
–
0
votes
0
answers
105
GATE2015-1-4
Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider the following statements for workability of concrete. As the slump increases, the Vebe time increases As the slump increases, the compaction factor increases Which of the following is TRUE? Both (i) and ( ... (i) and (ii) are False (i) is True and (ii) is False (i) is False and (ii) is True
Workability of concrete can be measured using slump, compaction factor and Vebe time. Consider the following statements for workability of concrete.As the slump increases...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Construction Materials and Management
gate2015-ce-1
structural-engineering
construction-materials-and-management
workability-of-concrete
material-properties-and-behaviour
+
–
0
votes
0
answers
106
GATE2015-1-5
Consider the following statements for air-entrained concrete: Air-entrainment reduces the water demand for a given level of workability Use of air-entrained concrete is required in environments where cyclic freezing and thawing is expected Which of the following is TRUE? Both (i) and (ii) are True Both (i) and (ii) are False (i) is True and (ii) is False (i) is False and (ii) is True
Consider the following statements for air-entrained concrete:Air-entrainment reduces the water demand for a given level of workabilityUse of air-entrained concrete is re...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Concrete Structures
gate2015-ce-1
concrete-structures
structural-engineering
air-entrained-concrete
+
–
0
votes
0
answers
107
GATE2015-1-6
Consider the singly reinforced beam shown in the figure below: At cross-section $XX$, which of the following statements is TRUE at the limit state? The variation of stress is linear and that of strain is non-linear The variation of strain is linear and that of stress is non-linear The variation of both stress and strain is linear The variation of both stress and strain is non - linear
Consider the singly reinforced beam shown in the figure below:At cross-section $XX$, which of the following statements is TRUE at the limit state?The variation of stress ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Solid Mechanics
gate2015-ce-1
solid-mechanics
structural-engineering
reinforced-beam
stress-and-starin
+
–
0
votes
0
answers
108
GATE2015-1-7
For the beam shown below, the stiffness coefficient $K_{22}$ can be written as $\dfrac{6EI}{L^2} \\$ $\dfrac{12EI}{L^3} \\$ $\dfrac{3EI}{L} \\$ $\dfrac{EI}{6L^2}$
For the beam shown below, the stiffness coefficient $K_{22}$ can be written as$\dfrac{6EI}{L^2} \\$$\dfrac{12EI}{L^3} \\$$\dfrac{3EI}{L} \\$$\dfrac{EI}{6L^2}$
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Analysis
gate2015-ce-1
structural-analysis
structural-engineering
stiffness-coefficient
+
–
0
votes
0
answers
109
GATE2015-1-8
The development length of a deformed reinforcement bar can be expressed as $(1/k) (\phi \sigma_s / \tau_{bd})$. From the $IS: 456 – 2000$, the value of $k$ can be calculated as _______
The development length of a deformed reinforcement bar can be expressed as $(1/k) (\phi \sigma_s / \tau_{bd})$. From the $IS: 456 – 2000$, the value of $k$ can be calcu...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Engineering
gate2015-ce-1
numerical-answers
structural-engineering
+
–
0
votes
0
answers
110
GATE2015-1-9
For the beam shown below, the value of the support moment $M$ is _____ $kN-m$.
For the beam shown below, the value of the support moment $M$ is _____ $kN-m$.
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Engineering
gate2015-ce-1
numerical-answers
structural-engineering
beam
support-moment
+
–
0
votes
0
answers
111
GATE2015-1-10
Two triangular wedges are glued together as shown in the following figure. The stress acting normal to the interface, $\sigma_n$ is _______ MPa.
Two triangular wedges are glued together as shown in the following figure. The stress acting normal to the interface, $\sigma_n$ is _______ MPa.
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Engineering
gate2015-ce-1
numerical-answers
structural-engineering
stress
+
–
0
votes
0
answers
112
GATE2015-1-19
The two columns below show some parameters and their possible values. ... $P - I, Q - V, R - VI, S - II$ $P - III, Q - II, R - V, S - IV$
The two columns below show some parameters and their possible values.$\begin{array}{ll} \textbf{Parameter} & \textbf{Value} \\ P – \text{ Gross Command Area} & I – 10...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Concrete Structures
gate2015-ce-1
concrete-structures
structural-engineering
design-of-columns
+
–
0
votes
0
answers
113
GATE2015-1-31
The composition of an air-entrained concrete is given below: ... gravity of OPC, sand and coarse aggregate to be $3.14$, $2.67$, and $2.74$, respectively. The air content is ______ $liters/m^3$.
The composition of an air-entrained concrete is given below:$\begin{array}{lcr} \text{Water} & : & 184 \: kg/m^3 \\ \text{Ordinary Portland Cement (OPC)} & : & 368 \: kg/...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Engineering
gate2015-ce-1
numerical-answers
structural-engineering
concrete-structures
air-entrained-concrete
+
–
0
votes
0
answers
114
GATE2015-1-32
The bracket plate connected to a column flange transmits a load of $100$ kN as shown in the following figure. The maximum force for which the bolts should be designed is ______ kN.
The bracket plate connected to a column flange transmits a load of $100$ kN as shown in the following figure. The maximum force for which the bolts should be designed is ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Steel Structures
gate2015-ce-1
numerical-answers
structural-engineering
steel-structures
bracket-connection
plates
+
–
0
votes
0
answers
115
GATE2015-1-33
Consider the singly reinforced beam section given below (left figure). The stress block parameters for the cross-section from $IS:456-2000$ are also given below (right figure). The moment of resistance for the given section by the limit state method is _______ kN-m
Consider the singly reinforced beam section given below (left figure). The stress block parameters for the cross-section from $IS:456-2000$ are also given below (right fi...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Analysis
gate2015-ce-1
numerical-answers
structural-engineering
structural-analysis
analysis-of-beams
+
–
0
votes
0
answers
116
GATE2015-1-34
For formation of $\textit{collapse mechanism}$ in the following figure, the minimum value of $P_u$ is $cM_p/L$. $M_p$ and $3M_p$ denote the plastic moment capacities of beam sections as shown in this figure. The value of $c$ is ________.
For formation of $\textit{collapse mechanism}$ in the following figure, the minimum value of $P_u$ is $cM_p/L$. $M_p$ and $3M_p$ denote the plastic moment capacities of b...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Steel Structures
gate2015-ce-1
numerical-answers
structural-engineering
steel-structures
concept-of-plastic-analysis-in-beams
+
–
0
votes
0
answers
117
GATE2015-1-35
A tapered circular rod of diameter varying from $20$ mm to $10$ mm is connected to another uniform circular rod of diameter $10$ mm as shown in the following figure. Both bars are made of same material with the modulus of elasticity, $E=2 \times 10^5$ MPa. When subjected to a load $P=30 \pi$ kN, the deflection at point $A$ is ______ mm.
A tapered circular rod of diameter varying from $20$ mm to $10$ mm is connected to another uniform circular rod of diameter $10$ mm as shown in the following figure. Both...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Solid Mechanics
gate2015-ce-1
numerical-answers
structural-engineering
solid-mechanics
modulus-of-elasticity
+
–
0
votes
0
answers
118
GATE2015-1-36
Two beams are connected by a linear spring as shown in the following figure. For a load $P$ as shown in the figure, the percentage of the applied load $P$ carried by the spring is _________.
Two beams are connected by a linear spring as shown in the following figure. For a load $P$ as shown in the figure, the percentage of the applied load $P$ carried by the ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Concrete Structures
gate2015-ce-1
numerical-answers
concrete-structures
structural-engineering
transfer-and-service-loads
beams
+
–
0
votes
0
answers
119
GATE2015-1-37
For the $2D$ truss with the applied loads shown below, the strain energy in the member $XY$ is _____ kN-m. For member $XY$, assume $AE=30$ kN, where $A$ is cross-section area and $E$ is the modulus of elasticity.
For the $2D$ truss with the applied loads shown below, the strain energy in the member $XY$ is _____ kN-m. For member $XY$, assume $AE=30$ kN, where $A$ is cross-section ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Analysis
gate2015-ce-1
numerical-answers
structural-analysis
structural-engineering
trusses
strain-energy
+
–
0
votes
0
answers
120
GATE2014-2-50
In a Marshall sample, the bulk specific gravity of mix and aggregates are $2.324$ and $2.546$ respectively. The sample includes $5 \%$ of bitumen (by total weight of mix) of specific gravity $1.10$. The theoretical maximum specific gravity of mix is $2.441$. The void filled with bitumen (VFB) in the Marshall sample (in $\%$) is _______
In a Marshall sample, the bulk specific gravity of mix and aggregates are $2.324$ and $2.546$ respectively. The sample includes $5 \%$ of bitumen (by total weight of mix)...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 25, 2018
Construction Materials and Management
gate2014-ce-2
numerical-answers
construction-materials-and-management
structural-engineering
bitumen
marshall-sample
+
–
Page:
« prev
1
2
3
4
5
6
next »
GO Civil
Email or Username
Show
Hide
Password
I forgot my password
Remember
Log in
Register