Register
Filter

Hot questions in Structural Engineering

0 votes
0 answers
123
GATE2016-2-32
For the stress state (in MPa) shown in the figure, the major principal stress is $10$ MPa. The shear stress $\tau$ is $10.0$ MPa $5.0$ MPa $2.5$ MPa $0.0$ MPa
For the stress state (in MPa) shown in the figure, the major principal stress is $10$ MPa.The shear stress $\tau$ is$10.0$ MPa$5.0$ MPa$2.5$ MPa$0.0$ MPa
0 votes
0 answers
125
GATE2017 CE-1: 45
The activity details of a project are given below: ... The estimated minimum time (in days) for the completion of the project will be __________
The activity details of a project are given below:$$\begin{array}{|c|c|c|} \hline \text{Activity} & \text{Depends on} & \text{Duration (in days)} \\ \hline P & \dots & 6 ...
0 votes
0 answers
129
GATE2015-1-7
For the beam shown below, the stiffness coefficient $K_{22}$ can be written as $\dfrac{6EI}{L^2} \\$ $\dfrac{12EI}{L^3} \\$ $\dfrac{3EI}{L} \\$ $\dfrac{EI}{6L^2}$
For the beam shown below, the stiffness coefficient $K_{22}$ can be written as$\dfrac{6EI}{L^2} \\$$\dfrac{12EI}{L^3} \\$$\dfrac{3EI}{L} \\$$\dfrac{EI}{6L^2}$
0 votes
0 answers
130
GATE2015-1-36
Two beams are connected by a linear spring as shown in the following figure. For a load $P$ as shown in the figure, the percentage of the applied load $P$ carried by the spring is _________.
Two beams are connected by a linear spring as shown in the following figure. For a load $P$ as shown in the figure, the percentage of the applied load $P$ carried by the ...
0 votes
0 answers
134
GATE2016-1-33
A plane truss with applied loads is shown in the figure. The members which do not carry any force are FT, TG, HU, MP, PL ET, GS, UR, VR, QL FT, GS, HU, MP, QL MP, PL, HU, FT, UR
A plane truss with applied loads is shown in the figure.The members which do not carry any force areFT, TG, HU, MP, PLET, GS, UR, VR, QLFT, GS, HU, MP, QLMP, PL, HU, FT, ...
0 votes
0 answers
135
GATE2016-1-36
For $M25$ concrete with creep coefficient of $1.5$, the long-term static modulus of elasticity (expressed in MPa) as per the provisions of $IS:456-2000$ is _____
For $M25$ concrete with creep coefficient of $1.5$, the long-term static modulus of elasticity (expressed in MPa) as per the provisions of $IS:456-2000$ is _____
0 votes
0 answers
136
GATE2015-1-9
For the beam shown below, the value of the support moment $M$ is _____ $kN-m$.
For the beam shown below, the value of the support moment $M$ is _____ $kN-m$.
0 votes
0 answers
140
GATE2015-1-10
Two triangular wedges are glued together as shown in the following figure. The stress acting normal to the interface, $\sigma_n$ is _______ MPa.
Two triangular wedges are glued together as shown in the following figure. The stress acting normal to the interface, $\sigma_n$ is _______ MPa.
0 votes
0 answers
153
GATE2015-1-31
The composition of an air-entrained concrete is given below: ... gravity of OPC, sand and coarse aggregate to be $3.14$, $2.67$, and $2.74$, respectively. The air content is ______ $liters/m^3$.
The composition of an air-entrained concrete is given below:$\begin{array}{lcr} \text{Water} & : & 184 \: kg/m^3 \\ \text{Ordinary Portland Cement (OPC)} & : & 368 \: kg/...
0 votes
0 answers
154
GATE Civil 2013 | Question: 31
All members in the rigid-jointed frame shown are prismatic and have the same flexural stiffness $EI$. Find the magnitude of the bending moment at $Q$ (in kNm) due to given loading ________
All members in the rigid-jointed frame shown are prismatic and have the same flexural stiffness $EI$. Find the magnitude of the bending moment at $Q$ (in kNm) due to give...
Page: