GO Civil
Login
Register
Dark Mode
Brightness
Profile
Edit Profile
Messages
My favorites
My Updates
Logout
Filter
No answer
No selected answer
No upvoted answer
Previous GATE
Featured
Recent questions without answers
0
votes
0
answers
881
GATE2016-1-50
Effluent from an industry ‘A’ has a pH of $4.2$. The effluent from another industry ‘B’ has double the hydroxyl (OH) ion concentration than the effluent from industry ‘A’. pH of effluent from the industry ‘B’ will be ______
Effluent from an industry ‘A’ has a pH of $4.2$. The effluent from another industry ‘B’ has double the hydroxyl (OH) ion concentration than the effluent from indu...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 27, 2018
Water and Waste Water Quality and Treatment
gate2016-ce-1
numerical-answers
water-and-waste-water-quality-and-treatment
environmental-engineering
effluent-discharge-standards
+
–
0
votes
0
answers
882
GATE2016-1-51
An electrostatic precipitator (ESP) with $5600\:m^2$ of collector plate area is $96$ percent efficient in treating $185\:m^3/s$ of flue gas from a $200$ MW thermal power plant. It was found that in order to achieve $97$ percent efficiency, the collector plate ... $99$ percent, the ESP collector plate area (expressed in $m^2$) would be ______
An electrostatic precipitator (ESP) with $5600\:m^2$ of collector plate area is $96$ percent efficient in treating $185\:m^3/s$ of flue gas from a $200$ MW thermal power ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 27, 2018
Air Pollution
gate2016-ce-1
numerical-answers
electrostatic-precipitator-collector
environmental-engineering
air-pollution
air-pollution-control
+
–
0
votes
0
answers
883
GATE2016-1-52
The $2$-day and $4$-day BOD values of a sewage sample are $100$ mg/L and $155$ mg/L, respectively. The value of BOD rate constant (expressed in per day) is __________
The $2$-day and $4$-day BOD values of a sewage sample are $100$ mg/L and $155$ mg/L, respectively. The value of BOD rate constant (expressed in per day) is __________
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 27, 2018
Water and Waste Water Quality and Treatment
gate2016-ce-1
numerical-answers
environmental-engineering
water-and-waste-water-quality-and-treatment
sewage
bod-rate-constant
+
–
0
votes
0
answers
884
GATE2016-1-53
A two lane, one-way road with radius of $50$ m is predominantly carrying lorries with wheelbase of $5$ m. The speed of lorries is restricted to be between $60$ kmph and $80$ kmph. The mechanical widening and psychological widening required at $60$ kmph are designated as $w_{me,60}$ and $w_{ps,60}$, ... $1.19 \:m, 0.50 \:m, 0.89 \:m, \text{ and } 0.50 \:m$
A two lane, one-way road with radius of $50$ m is predominantly carrying lorries with wheelbase of $5$ m. The speed of lorries is restricted to be between $60$ kmph and $...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 27, 2018
Transportation Infrastructure
gate2016-ce-1
transportation-engineering
transportation-infrastructure
geometric-design-of-highways
+
–
0
votes
0
answers
885
GATE2016-1-54
While traveling along and against the traffic stream, a moving observer measured the relative flows as $50$ vehicles/hr and $200$ vehicles/hr, respectively. The average speeds of the moving observer while traveling along and against the stream are $20$ km/hr and $30$ km/hr, respectively. The density of the traffic stream (expressed in vehicles/km) is _________
While traveling along and against the traffic stream, a moving observer measured the relative flows as $50$ vehicles/hr and $200$ vehicles/hr, respectively. The average s...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 27, 2018
Traffic Engineering
gate2016-ce-1
numerical-answers
traffic-engineering
transportation-engineering
density-of-traffic-stream
traffic-studios-on-flow-and-speed
+
–
0
votes
0
answers
886
GATE2016-1-55
The vertical angles subtended by the top of a tower T at two instrument stations set up at P and Q, are shown in the figure. The two stations are in line with the tower and spaced at a distance of $60$ m. Readings taken from these two stations on a leveling staff ... ($BM=450.000$ m) are also shown in the figure. The reduced level of the top of the tower T (expressed in m) is _____
The vertical angles subtended by the top of a tower T at two instrument stations set up at P and Q, are shown in the figure. The two stations are in line with the tower a...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 27, 2018
Geomatics Engineering
gate2016-ce-1
numerical-answers
geomatics-engineering
distance-and-angle-measurement
+
–
0
votes
0
answers
887
GATE2017 CE-1: 1
The matrix $P$ is the inverse of a matrix $Q$. If $I$ denotes the identity matrix, which one of the following options is correct? $PQ=I$ but $QP \neq I$ $QP=I$ but $PQ \neq I$ $PQ=I$ and $QP= I$ $PQ-QP= I$
The matrix $P$ is the inverse of a matrix $Q$. If $I$ denotes the identity matrix, which one of the following options is correct?$PQ=I$ but $QP \neq I$$QP=I$ but $PQ \neq...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Linear Algebra
gate2017-ce-1
linear-algebra
matrices
inverse-of-matrix
+
–
0
votes
0
answers
888
GATE2017 CE-1: 2
The number of parameters in the univariate exponential and Gaussian distributions, repsectively, are $2$ and $2$ $1$ and $2$ $2$ and $1$ $1$ and $1$
The number of parameters in the univariate exponential and Gaussian distributions, repsectively, are$2$ and $2$$1$ and $2$$2$ and $1$$1$ and $1$
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Probability and Statistics
gate2017-ce-1
probability-and-statistics
probability
gaussian-distributions
+
–
0
votes
0
answers
889
GATE2017 CE-1: 3
Let $x$ be a continuous variable defined over the interval $(- \infty, \infty)$, and $f(x) = e^{-x-e^{-x}}$. The integral $g(x)= \int f(x) \: dx$ is equal to $e^{e^{-x}}$ $e^{-e^{-x}}$ $e^{-e^{x}}$ $e^{-x}$
Let $x$ be a continuous variable defined over the interval $(- \infty, \infty)$, and $f(x) = e^{-x-e^{-x}}$. The integral $g(x)= \int f(x) \: dx$ is equal to$e^{e^{-x}}$$...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Calculus
gate2017-ce-1
calculus
integrals
continuous-variable
+
–
0
votes
0
answers
890
GATE2017 CE-1: 4
An elastic bar of length $L$, uniform cross sectional area $A$, coefficient of thermal expansion $\alpha$, and Young's modulus $E$ is fixed at the two ends. The temperature of the bar is increased by $T$, resulting in an axial stress $\sigma$. Keeping all other parameters unchanged ... , the axial stress would be $\sigma$ $2 \: \sigma$ $0.5 \: \sigma$ $0.25 \: \alpha \: \sigma$
An elastic bar of length $L$, uniform cross sectional area $A$, coefficient of thermal expansion $\alpha$, and Young’s modulus $E$ is fixed at the two ends. The tempera...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Engineering Mechanics
gate2017-ce-1
structural-engineering
axial-stress
engineering-mechanics
+
–
0
votes
0
answers
891
GATE2017 CE-1: 5
A simply supported beam is subjected to a uniformly distributed load. Which one of the following statements is true? Maximum or minimum shear force occurs where the curvature is zero Maximum or minimum bending moment occurs where the shear force is ... minimum bending moment occurs where the curvature is zero Maximum bending moment and maximum shear force occur at the same section
A simply supported beam is subjected to a uniformly distributed load. Which one of the following statements is true?Maximum or minimum shear force occurs where the curvat...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Solid Mechanics
gate2017-ce-1
structural-engineering
beams
solid-mechanics
simple-stress-and-strain-relationship
+
–
0
votes
0
answers
892
GATE2017 CE-1: 6
According to $IS \: 456 - 2000$, which one of the following statements about the depth of neutral axis $x_{\text{u, bal}}$ for a balanced reinforced concrete section is correct? $x_{\text{u, bal}}$ ... both the grade of concrete and grade of steel $x_{\text{u, bal}}$ does not depend on the grade of concrete and grade of steel
According to $IS \: 456 – 2000$, which one of the following statements about the depth of neutral axis $x_{\text{u, bal}}$ for a balanced reinforced concrete section is...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Concrete Structures
gate2017-ce-1
concrete-structures
structural-engineering
concrete-sections
+
–
0
votes
0
answers
893
GATE2017 CE-1: 7
The figure shows a two-hinged parabolic arch of span $L$ subjected to a uniformly distributed load of intensity $q$ per unit length. The maximum bending moment in the arch is equal to $\dfrac{qL^2}{8} \\$ $\dfrac{qL^2}{12} \\$ zero $\dfrac{qL^2}{10}$
The figure shows a two-hinged parabolic arch of span $L$ subjected to a uniformly distributed load of intensity $q$ per unit length.The maximum bending moment in the arch...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Analysis
gate2017-ce-1
solid-mechanics
structural-engineering
analysis-of-arches
+
–
0
votes
0
answers
894
GATE2017 CE-1: 8
Group I lists the type of gain or loss of strength in soils. Group II lists the property or process responsible for the loss or gain of strength in soils. ... $P-3, \: Q-2; \: R-1, \: S-4$ $P-4, \: Q-2; \: R-1, \: S-3$
Group I lists the type of gain or loss of strength in soils. Group II lists the property or process responsible for the loss or gain of strength in soils.$\begin{array}{l...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Soil Mechanics
gate2017-ce-1
soil-mechanics
geotechnical-engineering
strength-in-soils
+
–
0
votes
0
answers
895
GATE2017 CE-1: 9
A soil sample is subjected to a hydrostatic pressure, $\sigma$. The Mohr circle for any point in the soil sample would be a circle of radius $\sigma$ and center at the origin a circle of radius $\sigma$ and center at a distance $\sigma$ from the origin a point at a distance $\sigma$ from the origin a circle of diameter $\sigma$ and center at the origin
A soil sample is subjected to a hydrostatic pressure, $\sigma$. The Mohr circle for any point in the soil sample would bea circle of radius $\sigma$ and center at the ori...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Soil Mechanics
gate2017-ce-1
soil-mechanics
geotechnical-engineering
mohr-circle
+
–
0
votes
0
answers
896
GATE2017 CE-1: 10
A strip footing is resting on the ground surface of a pure clay bed having an undrained cohesion $c_u$. The ultimate bearing capacity of the footing is equal to $2 \pi \: c_u$ $\pi \: c_u$ $( \pi +1) \: c_u$ $(\pi + 2) \: c_u$
A strip footing is resting on the ground surface of a pure clay bed having an undrained cohesion $c_u$. The ultimate bearing capacity of the footing is equal to$2 \pi \: ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Foundation Engineering
gate2017-ce-1
foundation-engineering
geotechnical-engineering
bearing-capacity
+
–
0
votes
0
answers
897
GATE2017 CE-1: 11
A uniformly distributed line road of $500 \: kN/m$ is acting on the ground surface. Based on Boussinesq’s theory, the ratio of vertical stress at a depth $2$ m to that at $4$ m, right below the line of loading, is $0.25$ $0.5$ $2.0$ $4.0$
A uniformly distributed line road of $500 \: kN/m$ is acting on the ground surface. Based on Boussinesq’s theory, the ratio of vertical stress at a depth $2$ m to that ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Foundation Engineering
gate2017-ce-1
foundation-engineering
geotechnical-engineering
boussinesq's-theory
+
–
0
votes
0
answers
898
GATE2017 CE-1: 12
For a steady incompressible laminar flow between two infinite parallel stationary plates, the shear stress variation is linear with zero value at the plates linear with zero value at the center quadratic with zero value at the plates quadratic with zero value at the center
For a steady incompressible laminar flow between two infinite parallel stationary plates, the shear stress variation islinear with zero value at the plateslinear with zer...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Fluid Mechanics
gate2017-ce-1
fluid-mechanics
water-resources-engineering
laminar-flow
shear-stress
+
–
0
votes
0
answers
899
GATE2017 CE-1: 13
The reaction rate involving reactants $A$ and $B$ is given by $-k[A]^{\alpha} [B]^{\beta}$. Which one of the following statements is valid for the reaction to be first-order reaction? $\alpha=0$ and $\beta=0$ $\alpha=1$ and $\beta=0$ $\alpha=1$ and $\beta=1$ $\alpha=1$ and $\beta=2$
The reaction rate involving reactants $A$ and $B$ is given by $-k[A]^{\alpha} [B]^{\beta}$. Which one of the following statements is valid for the reaction to be first-or...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Fluid Mechanics
gate2017-ce-1
water-resources-engineering
first-order-reaction
fluid-mechanics
+
–
0
votes
0
answers
900
GATE2017 CE-1: 14
The wastewater from a city, containing a high concentration of biodegradable organics, is being steadily discharged into a flowing river at a location S. If the rate of aeration of the river water is lower than the rate of degradation of the organics, then the ... the location S. remains constant all along the length of the river. is lowest at a point downstream of the location S.
The wastewater from a city, containing a high concentration of biodegradable organics, is being steadily discharged into a flowing river at a location S. If the rate of a...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Water and Waste Water Quality and Treatment
gate2017-ce-1
environmental-engineering
water-and-waste-water-quality-and-treatment
biodegradation
+
–
0
votes
0
answers
901
GATE2017 CE-1: 15
Which one of the following is NOT present in the acid rain? $HNO_3$ $H_2SO_4$ $H_2CO_3$ $CH_3COOH$
Which one of the following is NOT present in the acid rain?$HNO_3$$H_2SO_4$$H_2CO_3$$CH_3COOH$
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Hydraulics
gate2017-ce-1
acid-rain
water-resources-engineering
hydraulics
+
–
0
votes
0
answers
902
GATE2017 CE-1: 16
A super-elevation $e$ is provided on a circular horizontal curve such that a vehicle can be stopped on the curve without sliding. Assuming a design speed $v$ and maximum coefficient of side friction $f_{max}$, which one of the following criteria should be satisfied? $e \leq f_{max}$ $e > f_{max}$ no limit on $e$ can be set $e = \dfrac{1-(f_{max})^2}{f_{max}}$
A super-elevation $e$ is provided on a circular horizontal curve such that a vehicle can be stopped on the curve without sliding. Assuming a design speed $v$ and maximum ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Transportation Infrastructure
gate2017-ce-1
transportation-engineering
transportation-infrastructure
geometric-design-of-highways
+
–
0
votes
0
answers
903
GATE2017 CE-1: 17
A runway is being constructed in a new airport as per the International Civil Aviation Organization (ICAO) recommendations. The elevation and the airport reference temperature of this airport are $535 \: m$ above the mean sea level and $22.65^{\circ}C$, respectively. Consider the ... length of runway corrected for the temperature is $2223 \: m$ $2250 \: m$ $2500 \: m$ $2750 \: m$
A runway is being constructed in a new airport as per the International Civil Aviation Organization (ICAO) recommendations. The elevation and the airport reference temper...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Transportation Infrastructure
gate2017-ce-1
transportation-infrastructure
transportation-engineering
airport-runway-length
+
–
0
votes
0
answers
904
GATE2017 CE-1: 18
The accuracy of an Electronic Distance Measuring Instrument (EDMI) is specified as $\pm (a \: mm + b \: ppm)$. Which one of the following statements is correct? Both $a$ and $b$ remain constant, irrespective of the distance being measured $a$ ... proportion to the distance being measured and $b$ remains constant Both $a$ and $b$ vary in proportion to the distance being measured
The accuracy of an Electronic Distance Measuring Instrument (EDMI) is specified as $\pm (a \: mm + b \: ppm)$. Which one of the following statements is correct?Both $a$ a...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Transportation Infrastructure
gate2017-ce-1
transportation-infrastructure
transportation-engineering
electronic-distance-measuring-instrument(edmi)
+
–
0
votes
0
answers
905
GATE2017 CE-1: 19
The number of spectral bands in the Enhanced Thematic Mapper sensor on the remote sensing satellite Landsat-$7$ is: $64$ $10$ $8$ $15$
The number of spectral bands in the Enhanced Thematic Mapper sensor on the remote sensing satellite Landsat-$7$ is:$64$$10$$8$$15$
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Geomatics Engineering
gate2017-ce-1
geomatics-engineering
photogrammetry
remote-sensing
+
–
0
votes
0
answers
906
GATE2017 CE-1: 20
Consider the following partial differential equation: $3 \frac{\partial ^2 \phi}{ \partial x^2} + B \frac{ \partial ^2 \phi}{\partial x \partial y} + 3 \frac{\partial ^2 \phi}{\partial y^2} + 4 \phi =0$ For this equation to be classified as parabolic, the value of $B^2$ must be ________
Consider the following partial differential equation:$$3 \frac{\partial ^2 \phi}{ \partial x^2} + B \frac{ \partial ^2 \phi}{\partial x \partial y} + 3 \frac{\partial ^2 ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Partial Differential Equation (PDE)
gate2017-ce-1
numerical-answers
partial-differential-equation
+
–
0
votes
0
answers
907
GATE2017 CE-1: 21
$\underset{x \to 0}{\lim} \bigg( \dfrac{\tan x}{x^2-x} \bigg)$ is equal to _________
$\underset{x \to 0}{\lim} \bigg( \dfrac{\tan x}{x^2-x} \bigg)$ is equal to _________
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Calculus
gate2017-ce-1
numerical-answers
calculus
limits
+
–
0
votes
0
answers
908
GATE2017 CE-1: 22
A $3 \: m$ thick clay layer is subjected to an initial uniform pore pressure of $145 \: kPa$ as shown in the figure. For the given ground conditions, the time (in days, rounded to the nearest integer) required for $90 \%$ consolidation would be ________
A $3 \: m$ thick clay layer is subjected to an initial uniform pore pressure of $145 \: kPa$ as shown in the figure.For the given ground conditions, the time (in days, ro...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Geotechnical Engineering
gate2017-ce-1
numerical-answers
geotechnical-engineering
soil-mechanics
characteristics-of-clay
+
–
0
votes
0
answers
909
GATE2017 CE-1: 23
A triangular pipe network is shown in the figure. The head loss in each pipe is given by $h_f = rQ^{1.8}$, with the variables expressed in a consistent set of units. The value of $r$ for the pipe $AB$ is $1$ and for the pipe $BC$ is $2$. If the ... is equally divided between the pipes $AB$ and $AC$, the value of $r$ (up to two decimal places) for the pipe $AC$ should be _______
A triangular pipe network is shown in the figure.The head loss in each pipe is given by $h_f = rQ^{1.8}$, with the variables expressed in a consistent set of units. The v...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Fluid Mechanics
gate2017-ce-1
numerical-answers
fluid-mechanics
water-resources-engineering
flow-in-pipes
+
–
0
votes
0
answers
910
GATE2017 CE-1: 24
The ordinates of a $2$-hour unit hydrograph for a catchment are given as $\begin{array}{llllll} \text{Time (h)} & 0 & 1 & 2 & 3 & 4 \\ \text{Ordinate } (m^3/s) & 0 & 5 & 12 & 25 & 41 \end{array}$ The ordinate (in $m^3/s$) of a $4$-hour unit hydrograph for this catchment at the time of $3$ h would be _________
The ordinates of a $2$-hour unit hydrograph for a catchment are given as$$\begin{array}{llllll} \text{Time (h)} & 0 & 1 & 2 & 3 & 4 \\ \text{Ordinate } (m^3/s) & 0 & 5 &...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Hydrology
gate2017-ce-1
numerical-answers
hydrology
water-resources-engineering
hydrographs
+
–
0
votes
0
answers
911
GATE2017 CE-1: 25
Vehicles arriving at an intersection from one of the approach roads follow the Poisson distribution. The mean rate of arrival is $900$ vehicles per hour. If a gap is defined as the time difference between two successive vehicle arrivals (with vehicles assumed to be points), the probability (up to four decimal places) that the gap is greater than $8$ seconds is ___________
Vehicles arriving at an intersection from one of the approach roads follow the Poisson distribution. The mean rate of arrival is $900$ vehicles per hour. If a gap is defi...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Traffic Engineering
gate2017-ce-1
numerical-answers
traffic-engineering
transportation-engineering
poisson-distribution
+
–
0
votes
0
answers
912
GATE2017 CE-1: 26
For the function $f(x)=a+bx,0\leq x\leq1,$ to be a valid probability density function,which one of the following statements is correct? $a=1,b=4$ $b=0.5,b=1$ $a=0,b=1$ $a=1,b=-1$
For the function $f(x)=a+bx,0\leq x\leq1,$ to be a valid probability density function,which one of the following statements is correct?$a=1,b=4$$b=0.5,b=1$$a=0,b=1$$a=1,b...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Probability and Statistics
gate2017-ce-1
probability-and-statistics
probability
probability-density-function
+
–
0
votes
0
answers
913
GATE2017 CE-1: 27
The solution of the equation $\dfrac{dQ}{dt} +Q =1$ with $Q=0$ at $t=0$ is $Q(t)=e^{-t}-1$ $Q(t)=1+ e^{-t}$ $Q(t)=1 -e^t$ $Q(t)=1- e^{-t}$
The solution of the equation $\dfrac{dQ}{dt} +Q =1$ with $Q=0$ at $t=0$ is$Q(t)=e^{-t}-1$$Q(t)=1+ e^{-t}$$Q(t)=1 -e^t$$Q(t)=1- e^{-t}$
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Ordinary Differential Equation (ODE)
gate2017-ce-1
ordinary-differential-equation
+
–
0
votes
0
answers
914
GATE2017 CE-1: 28
Consider the matrix $\begin{bmatrix} 5 & -1 \\ 4 & 1 \end{bmatrix}$. Which one of the following statements is TRUE for the eigenvalues and eigenvectors of this matrix? Eigenvalue $3$ has a multiplicity of $2$, and only one independent ... has a multiplicity of $2$, and no independent eigenvector exists. Eigenvalues are $3$ and $-3$, and two independent eigenvectors exist.
Consider the matrix $\begin{bmatrix} 5 & -1 \\ 4 & 1 \end{bmatrix}$. Which one of the following statements is TRUE for the eigenvalues and eigenvectors of this matrix?Eig...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Linear Algebra
gate2017-ce-1
linear-algebra
matrices
eigen-values
eigen-vectors
+
–
0
votes
0
answers
915
GATE2017 CE-1: 29
A planar truss tower structure is shown in the figure. Consider the following statements about the external and internal determinacies of the truss. Externally Determinate External Static Indeterminacy $=1$ External Static Indeterminacy $=2$ Internally Determinate Internal Static Indeterminacy $=1$ ... S-False; T-False; U- True P-True; Q- True; R-False; S-True; T-False; U- True
A planar truss tower structure is shown in the figure.Consider the following statements about the external and internal determinacies of the truss.Externally DeterminateE...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Structural Analysis
gate2017-ce-1
structural-analysis
structural-engineering
analysis-of-trusses
+
–
0
votes
0
answers
916
GATE2017 CE-1: 30
Group I contains three broad classes of irrigation supply canal outlets, Group II presents hydraulic performance attributes. ... $P - 2; \: Q - 3; \: R - 1$ $P - 1; \: Q - 3; \: R - 2$
Group I contains three broad classes of irrigation supply canal outlets, Group II presents hydraulic performance attributes.$$\begin{array}{|ll|ll|} \hline {} & \text{Gro...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Irrigation
gate2017-ce-1
irrigation
water-resources-engineering
lined-and-unlined-canals
+
–
0
votes
0
answers
917
GATE2017 CE-1: 31
A $1$ m wide rectangular channel has a bed slope of $0.0016$ and the Manning’s roughness coefficient is $0.04$ Uniform flow takes the place in the channel at a flow depth of $0.5$m. At a particular section, gradually varied flow (GVF) is observed and the flow depth is measured as $0.6$ m. The GVF profile at section is classified as $S_1$ $S_2$ $M_1$ $M_2$
A $1$ m wide rectangular channel has a bed slope of $0.0016$ and the Manning’s roughness coefficient is $0.04$ Uniform flow takes the place in the channel at a flow dep...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Hydraulics
gate2017-ce-1
water-resources-engineering
mannings-coefficient
hydraulics
gradually-varied-flow
flow-measurement-in-channels
+
–
0
votes
0
answers
918
GATE2017 CE-1: 32
The following observations are made while testing aggregate for its suitability in pavement construction: Mass of oven-dry aggregate in air $=1000 $ g Mass of saturated surface-dry aggregate in air $=1025 $ g Mass of saturated surface-dry aggregate under water $=625 $ g ... and water absorption $=2.5 \%$ apparent specific gravity of aggregate $=2.5$ and water absorption $=2.4 \%$
The following observations are made while testing aggregate for its suitability in pavement construction:Mass of oven-dry aggregate in air $=1000 $ g Mass of saturated su...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Highway Pavements
gate2017-ce-1
highway-pavements
transportation-engineering
+
–
0
votes
0
answers
919
GATE2017 CE-1: 33
The queue length (in number of vehicles) versus time (in seconds) plot for an approach to a signalized intersection with the cycle length of $96$ seconds is shown in the figure (not drawn to scale) At time $t=0$, the light has just turned red. The ... delay per vehicle $=45$ seconds $s=1200$ vph, and for this cycle, the average stopped delay per vehicle $=28.125$ seconds
The queue length (in number of vehicles) versus time (in seconds) plot for an approach to a signalized intersection with the cycle length of $96$ seconds is shown in the ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Traffic Engineering
gate2017-ce-1
traffic-engineering
transportation-engineering
travel-time-delay
statical-analysis-of-traffic-data
+
–
0
votes
0
answers
920
GATE2017 CE-1: 34
The radius of a horizontal circular curve on a highway is $120$ m. The design speed is $60$ km/hour, and the design coefficient of lateral friction between the tyre and road surface is $0.15$. The estimated value of superrelevation required (if full lateral friction is assumed to develop), and the ... $\dfrac{1}{11.6} \text{ and } 0.24 \\$ $\dfrac{1}{12.9} \text{ and } 0.24$
The radius of a horizontal circular curve on a highway is $120$ m. The design speed is $60$ km/hour, and the design coefficient of lateral friction between the tyre and r...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Traffic Engineering
gate2017-ce-1
traffic-engineering
transportation-engineering
traffic-studios-on-flow-and-speed
+
–
Page:
« prev
1
...
20
21
22
23
24
25
26
...
36
next »
GO Civil
Email or Username
Show
Hide
Password
I forgot my password
Remember
Log in
Register