GO Civil
Login
Register
Dark Mode
Brightness
Profile
Edit Profile
Messages
My favorites
My Updates
Logout
Filter
No answer
No selected answer
No upvoted answer
Previous GATE
Featured
Recent questions without answers
0
votes
0
answers
361
GATE Civil 2021 Set 2 | Question: 3
The unit normal vector to the surface $X^{2} + Y^{2} + Z^{2} – 48 = 0$ at the point $(4, 4, 4)$ is $\frac{1}{\sqrt{2}},\frac{1}{\sqrt{2}},\frac{1}{\sqrt{2}}$ $\frac{1}{\sqrt{3}},\frac{1}{\sqrt{3}},\frac{1}{\sqrt{3}}$ $\frac{2}{\sqrt{2}},\frac{2}{\sqrt{2}},\frac{2}{\sqrt{2}}$ $\frac{1}{\sqrt{5}},\frac{1}{\sqrt{5}},\frac{1}{\sqrt{5}}$
The unit normal vector to the surface $X^{2} + Y^{2} + Z^{2} – 48 = 0$ at the point $(4, 4, 4)$ is $\frac{1}{\sqrt{2}},\frac{1}{\sqrt{2}},\frac{1}{\sqrt{2}}$$\frac{1}{\...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Calculus
gatecivil-2021-set2
calculus
vector-calculus
vector-identities
unit-normal-vector
+
–
0
votes
0
answers
362
GATE Civil 2021 Set 2 | Question: 4
If $\text{A}$ is a square matrix then orthogonality property mandates $AA^{T}=I$ $AA^{T}=0$ $AA^{T}=A^{-1}$ $AA^{T}=A^{2}$
If $\text{A}$ is a square matrix then orthogonality property mandates$AA^{T}=I$$AA^{T}=0$$AA^{T}=A^{-1}$$AA^{T}=A^{2}$
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Linear Algebra
gatecivil-2021-set2
linear-algebra
matrices
matrix-algebra
+
–
0
votes
0
answers
363
GATE Civil 2021 Set 2 | Question: 5
In general, the $\text{CORRECT}$ sequence of surveying operations is Field observations $\rightarrow$ Reconnaissance $\rightarrow$ Data analysis $\rightarrow$ Map making Data analysis $\rightarrow$ Reconnaissance $\rightarrow$ Field ... $\rightarrow$ Data analysis $\rightarrow$ Field observations $\rightarrow$ Map making
In general, the $\text{CORRECT}$ sequence of surveying operations isField observations $\rightarrow$ Reconnaissance $\rightarrow$ Data analysis $\rightarrow$ Map makin...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Geomatics Engineering
gatecivil-2021-set2
principles-of-surveying
+
–
0
votes
0
answers
364
GATE Civil 2021 Set 2 | Question: 6
Strain hardening of structural steel means experiencing higher stress than yield stress with increased deformation strengthening steel member externally for reducing strain experienced strain occurring before plastic flow of steel material decrease in the stress experienced with increasing strain
Strain hardening of structural steel meansexperiencing higher stress than yield stress with increased deformationstrengthening steel member externally for reducing strain...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Solid Mechanics
gatecivil-2021-set2
simple-stress-and-strain-relationship
+
–
0
votes
0
answers
365
GATE Civil 2021 Set 2 | Question: 7
A single story building model is shown in the figure. The rigid bar of mass $\text{m}$' is supported by three massless elastic columns whose ends are fixed against rotation. For each of the columns, the applied lateral force $\text{(P)}$ ... $6\sqrt{\frac{6EI}{mL^{3}}}\text{rad/s}$ $\frac{2}{L}\sqrt{\frac{EI}{m}}\text{rad/s}$
A single story building model is shown in the figure. The rigid bar of mass ‘$\text{m}$’ is supported by three massless elastic columns whose ends are fixed against r...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Structural Analysis
gatecivil-2021-set2
slope-deflection-method
lateral-deflection-profile
+
–
0
votes
0
answers
366
GATE Civil 2021 Set 2 | Question: 8
Seasoning of timber for use in construction is done essentially to increase strength and durability smoothen timber surfaces remove knots from timber logs cut timber in right season and geometry
Seasoning of timber for use in construction is done essentially toincrease strength and durabilitysmoothen timber surfacesremove knots from timber logscut timber in right...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Construction Materials and Management
gatecivil-2021-set2
construction-materials
material-behavior-and-properties
timber
+
–
0
votes
0
answers
367
GATE Civil 2021 Set 2 | Question: 9
In case of bids in Two-Envelop System, the correct option is Technical bid is opened first Financial bid is opened first Both (Technical and Financial) bids are opened simultaneously Either of the two (Technical and Financial) bids can be opened first
In case of bids in Two-Envelop System, the correct option isTechnical bid is opened firstFinancial bid is opened firstBoth (Technical and Financial) bids are opened simul...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Construction Materials and Management
gatecivil-2021-set2
construction-management
bidding
+
–
0
votes
0
answers
368
GATE Civil 2021 Set 2 | Question: 11
As per the Unified Soil Classification System $\text{(USCS)}$, the type of soil represented by $\text{MH}$' is Inorganic silts of high plasticity with liquid limit more than $50\%$ Inorganic silts of low plasticity with liquid limit less ... high plasticity with liquid limit less than $50\%$ Inorganic clays of low plasticity with liquid limit more than $50\%$
As per the Unified Soil Classification System $\text{(USCS)}$, the type of soil represented by ‘$\text{MH}$’ isInorganic silts of high plasticity with liquid limit mo...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Soil Mechanics
gatecivil-2021-set2
unified-and-indian-standard-soil-classification-system
+
–
1
votes
0
answers
369
GATE Civil 2021 Set 2 | Question: 12
The ratio of the momentum correction factor to the energy correction factor for a laminar flow in a pipe is $\frac{1}{2}$ $\frac{2}{3}$ $1$ $\frac{3}{2}$
The ratio of the momentum correction factor to the energy correction factor for a laminar flow in a pipe is$\frac{1}{2}$$\frac{2}{3}$$1$$\frac{3}{2}$
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Fluid Mechanics
gatecivil-2021-set2
flow-in-pipes
laminar-flow
+
–
0
votes
0
answers
370
GATE Civil 2021 Set 2 | Question: 13
Relationship between traffic speed and density is described using a negatively sloped straight line. If $v_{f}$ is the free flow speed then the speed at which the maximum flow occurs is $0$ $\frac{v_{f}}{4}$ $\frac{v_{f}}{2}$ $v_{f}$
Relationship between traffic speed and density is described using a negatively sloped straight line. If $v_{f}$ is the free flow speed then the speed at which the maximum...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Traffic Engineering
gatecivil-2021-set2
traffic-studios-on-flow-and-speed
+
–
0
votes
0
answers
371
GATE Civil 2021 Set 2 | Question: 14
Determine the correctness or otherwise of the following Assertion $\text{[a]}$ and the Reason $\text{[r]}$. $\text{Assertion [a]}$: One of the best ways to reduce the amount of solid wastes is to reduce the consumption of raw materials. $\text{Reason [r]}$: Solid ... Both $\text{[a]}$ and $\text{[r]}$ are false $\text{[a]}$ is true but $\text{[r]}$ is false
Determine the correctness or otherwise of the following Assertion $\text{[a]}$ and the Reason $\text{[r]}$.$\text{Assertion [a]}$: One of the best ways to reduce the amou...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Municipal Solid Wastes
gatecivil-2021-set2
solid-waste-management
generation
+
–
0
votes
0
answers
372
GATE Civil 2021 Set 2 | Question: 15
The hardness of a water sample is measured directly by titration with $\text{0.01 M}$ solution of ethylenediamine tetraacetic acid $\text{(EDTA)}$ using eriochrome black $\text{T (EBT)}$ as an indicator. The $\text{EBT}$ reacts ... colour of the solution changes from blue-green to reddish brown blue to colourless reddish brown to pinkish yellow Wine red to blue
The hardness of a water sample is measured directly by titration with $\text{0.01 M}$ solution of ethylenediamine tetraacetic acid $\text{(EDTA)}$ using eriochrome black ...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Water and Waste Water Quality and Treatment
gatecivil-2021-set2
basics-of-water-quality-standards
physical-chemical-and-biological-parameters
hardness-of-water
+
–
0
votes
0
answers
373
GATE Civil 2021 Set 2 | Question: 16
The softening point of bitumen has the same unit as that of distance temperature time viscosity
The softening point of bitumen has the same unit as that ofdistancetemperaturetimeviscosity
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Highway Pavements
gatecivil-2021-set2
desirable-properties-of-bitumen
softening-point-of-bitumen
+
–
0
votes
0
answers
374
GATE Civil 2021 Set 2 | Question: 17
Which of the following statement$\text{(s)}$ is/are correct? Increased levels of carbon monoxide in the indoor environment result in the formation of carboxyhemoglobin and the long term exposure becomes a cause of cardiovascular diseases ... in the indoor environment will result in the formation of photochemical smog which is a cause of cardiovascular diseases
Which of the following statement$\text{(s)}$ is/are correct?Increased levels of carbon monoxide in the indoor environment result in the formation of carboxyhemoglobin and...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Air Pollution
gatecivil-2021-set2
multiple-selects
types-of-pollutants
sources-and-impacts
+
–
0
votes
0
answers
375
GATE Civil 2021 Set 2 | Question: 18
The value ($\textit{round off to one decimal place}$) of $\int_{-1}^{1}x\:e^{\left | x \right |}dx$ is ______________
The value ($\textit{round off to one decimal place}$) of $\int_{-1}^{1}x\:e^{\left | x \right |}dx$ is ______________
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Calculus
gatecivil-2021-set2
numerical-answers
calculus
definite-integral
+
–
0
votes
0
answers
376
GATE Civil 2021 Set 2 | Question: 19
A solid circular torsional member $\text{OPQ}$ is subjected to torsional moments as shown in the figure (not to scale). The yield shear strength of the constituent material is $\text{160 MPa}$. The absolute maximum shear stress in the member (in $\text{MPa}$, $\textit{round off to one decimal place}$) is __________________________
A solid circular torsional member $\text{OPQ}$ is subjected to torsional moments as shown in the figure (not to scale). The yield shear strength of the constituent materi...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Solid Mechanics
gatecivil-2021-set2
numerical-answers
torsion
shear-stress
+
–
0
votes
0
answers
377
GATE Civil 2021 Set 2 | Question: 20
A propped cantilever beam $\text{XY}$, with an internal hinge at the middle, is carrying a uniformly distributed load of $\text{10 kN/m}$, as shown in the figure. The vertical reaction at support $\text{X}$ ( in $\text{kN}$, $\textit{in integer}$) is ___________
A propped cantilever beam $\text{XY}$, with an internal hinge at the middle, is carrying a uniformly distributed load of $\text{10 kN/m}$, as shown in the figure.The vert...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Structural Analysis
gatecivil-2021-set2
numerical-answers
analysis-of-beams
cantilever-beam
+
–
0
votes
0
answers
378
GATE Civil 2021 Set 2 | Question: 21
The internal $(d_{i})$ and external $(d_{o})$ diameters of a Shelby sampler are $\text{48 mm}$ and $\text{52 mm}$, respectively. The area ratio $(A_{r})$ of the sampler (in $\%, \textit{round off to two decimal palces}$) is ________________
The internal $(d_{i})$ and external $(d_{o})$ diameters of a Shelby sampler are $\text{48 mm}$ and $\text{52 mm}$, respectively. The area ratio $(A_{r})$ of the sampler (...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Foundation Engineering
gatecivil-2021-set2
numerical-answers
standard-and-cone-penetration-test
+
–
0
votes
0
answers
379
GATE Civil 2021 Set 2 | Question: 22
A $12$-hour unit hydrograph (of $\text{1 cm}$ excess rainfall) of a catchment is of a triangular shape with a base width of $144$ hour and a peak discharge of $23\text{ m}^3\text{/s}$. The area of the catchment (in $\text{km}^2, \textit{round off to the nearest integer}$) is _____________
A $12$-hour unit hydrograph (of $\text{1 cm}$ excess rainfall) of a catchment is of a triangular shape with a base width of $144$ hour and a peak discharge of $23\text{ m...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Hydrology
gatecivil-2021-set2
numerical-answers
surface-runoff-models
rainfall
+
–
0
votes
0
answers
380
GATE Civil 2021 Set 2 | Question: 23
A lake has a maximum depth of $\text{60 m}$. If the mean atmospheric pressure in the lake region is $\text{91 kPa}$ and the unit weight of the lake water is $\text{9790 N/m}^{3}$, the absolute pressure (in $\text{kPa}, \textit{round off to two decimal places}$) at the maximum depth of the lake is ___________________
A lake has a maximum depth of $\text{60 m}$. If the mean atmospheric pressure in the lake region is $\text{91 kPa}$ and the unit weight of the lake water is $\text{9790 N...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Fluid Mechanics
gatecivil-2021-set2
numerical-answers
momentum-and-energy-equations
fluid-statics
+
–
0
votes
0
answers
381
GATE Civil 2021 Set 2 | Question: 24
In a three-phase signal system design for a four-leg intersection, the critical flow ratios for each phase are $0.18, 0.32$, and $0.22$. The total loss time in each of the phases is $\text{2 s}$. As per Webster's formula, the optimal cycle length (in $\text{s}, \textit{round off to the nearest integer}$) is _______________
In a three-phase signal system design for a four-leg intersection, the critical flow ratios for each phase are $0.18, 0.32$, and $0.22$. The total loss time in each of th...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Traffic Engineering
gatecivil-2021-set2
numerical-answers
traffic-signal
design-by-websters-method
+
–
0
votes
0
answers
382
GATE Civil 2021 Set 2 | Question: 25
A horizontal angle $\theta$ ... $\theta$ ( in degree, $\textit{round off to two decimal places}$is _________________
A horizontal angle $\theta$ is measured by four different surveyors multiple times and the values reported are given below.$$\begin{array}{|lc|cI|cI|cI|cI|cI|}\hline&\tex...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Geomatics Engineering
gatecivil-2021-set2
numerical-answers
distance-angle-measurement
+
–
0
votes
0
answers
383
GATE Civil 2021 Set 2 | Question: 26
If $\text{k}$ is a constant, the general solution of $\dfrac{dy}{dx}-\dfrac{y}{x}=1$ will be in the form of $y=x\text{ ln}(kx)$ $y=k\text{ ln}(kx)$ $y=x\text{ ln}(x)$ $y=xk\text{ ln}(k)$
If $\text{k}$ is a constant, the general solution of $\dfrac{dy}{dx}-\dfrac{y}{x}=1$ will be in the form of$y=x\text{ ln}(kx)$$y=k\text{ ln}(kx)$$y=x\text{ ln}(x)$$y=xk\t...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Ordinary Differential Equation (ODE)
gatecivil-2021-set2
ordinary-differential-equation
+
–
0
votes
0
answers
384
GATE Civil 2021 Set 2 | Question: 27
The smallest eigenvalue and the corresponding eigenvector of the matrix $\begin{bmatrix} 2 & -2 \\ -1 & 6 \end{bmatrix}$, respectively, are $1.55$ and $\begin{Bmatrix} 2.00\\ 0.45 \end{Bmatrix}$ $2.00$ ... and $\begin{Bmatrix} -2.55\\ -0.45 \end{Bmatrix}$ $1.55$ and $\begin{Bmatrix} 2.00\\ -0.45 \end{Bmatrix}$
The smallest eigenvalue and the corresponding eigenvector of the matrix $\begin{bmatrix} 2 & -2 \\ -1 & 6 \end{bmatrix}$, respectively, are$1.55$ and $\begin{Bmatrix} 2.0...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Linear Algebra
gatecivil-2021-set2
linear-algebra
matrices
eigen-values
eigen-vectors
+
–
0
votes
0
answers
385
GATE Civil 2021 Set 2 | Question: 28
A prismatic steel beam is shown in the figure. The plastic moment, $M_{P}$ calculated for the collapse mechanism using static method and kinematic method is $M_{P,static}> \frac{2PL}{9}=M_{P,kinematic}$ $M_{P,static}= \frac{2PL}{9}\neq M_{P,kinematic}$ $M_{P,static}= \frac{2PL}{9}= M_{P,kinematic}$ $M_{P,static}< \frac{2PL}{9}= M_{P,kinematic}$
A prismatic steel beam is shown in the figure.The plastic moment, $M_{P}$ calculated for the collapse mechanism using static method and kinematic method is$M_{P,static} \...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Steel Structures
gatecivil-2021-set2
concept-of-plastic-analysis
beams-and-frames
+
–
0
votes
0
answers
386
GATE Civil 2021 Set 2 | Question: 29
A frame $\text{EFG}$ is shown in the figure. All members are prismatic and have equal flexural rigidity. The member $\text{FG}$ carries a uniformly distributed load $\text{w}$ per unit length. Axial deformation of any member is neglected. Considering the joint $\text{F}$ being ... $\text{0.375 wL}$ $\text{0.453 wL}$ $\text{0.482 wL}$ $\text{0.500 wL}$
A frame $\text{EFG}$ is shown in the figure. All members are prismatic and have equal flexural rigidity. The member $\text{FG}$ carries a uniformly distributed load $\tex...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Solid Mechanics
gatecivil-2021-set2
flexural-and-shear-stress
+
–
0
votes
0
answers
387
GATE Civil 2021 Set 2 | Question: 30
A clay layer of thickness $\text{H}$ has a preconsolidation pressure $p_{c}$ and an initial void ratio $e_{0}$.The initial effective overburden stress at the mid-height of the layer is $p_{0}$. At the same location, the increment in effective stress due to applied external load ...
A clay layer of thickness $\text{H}$ has a preconsolidation pressure $p_{c}$ and an initial void ratio $e_{0}$.The initial effective overburden stress at the mid-height o...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Soil Mechanics
gatecivil-2021-set2
time-rate-of-consolidation
+
–
0
votes
0
answers
388
GATE Civil 2021 Set 2 | Question: 31
A rectangular open channel of $\text{6 m}$ width is carrying a discharge of $20 \text{ m$^{3}$/s}$. Consider the acceleration due to gravity as $ ... the given discharge will then be $\text{0.82 m}$ $\text{1.04 m}$ $\text{2.56 m}$ $\text{3.18 m}$
A rectangular open channel of $\text{6 m}$ width is carrying a discharge of $20 \text{ m$^{3}$/s}$. Consider the acceleration due to gravity as $9.81 \text{ m/s}^{2}$ and...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Hydraulics
gatecivil-2021-set2
flow-measurement-in-channels
rectangular-channels
+
–
0
votes
0
answers
389
GATE Civil 2021 Set 2 | Question: 32
Read the statements given below. Value of the wind profile exponent for the 'very unstable' atmosphere is smaller than the wind profile exponent for the 'neutral' atmosphere. Downwind concentration of air pollutants due to an elevated point source will be ... is False and $\text{iii}$ is False $\text{iii}$ is False and $\text{iv}$ is False
Read the statements given below.Value of the wind profile exponent for the 'very unstable' atmosphere is smaller than the wind profile exponent for the 'neutral' atmosphe...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Air Pollution
gatecivil-2021-set2
sources-and-impacts-of-pollutants
+
–
0
votes
0
answers
390
GATE Civil 2021 Set 2 | Question: 33
A water filtration unit is made of uniform-size sand particles of $\text{0.4 mm}$ diameter with a shape factor of $0.84$ and specific gravity of $2.55$. The depth of the filter bed is $\text{0.70 m}$ and the porosity is $0.35$. The filter bed is to be expanded to a ... $6.35 \times 10^{-3}\text{ m/s}$ $0.69 \text{ cm/s}$ $0.75 \text{ cm/s}$
A water filtration unit is made of uniform-size sand particles of $\text{0.4 mm}$ diameter with a shape factor of $0.84$ and specific gravity of $2.55$. The depth of the ...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Hydrology
gatecivil-2021-set2
infiltration
+
–
0
votes
0
answers
391
GATE Civil 2021 Set 2 | Question: 34
For a given traverse, latitudes and departures are calculated and it is found that sum of latitudes is equal to $\text{+2.1 m}$ and the sum of departures is equal to $\text{-2.8 m}$. The length and bearing of the closing error, respectively, are $\text{3.50 m}$ ... $53.13^{\circ}$ $\text{SE}$ $\text{3.50 m}$ and $53.13^{\circ}$ $\text{SE}$
For a given traverse, latitudes and departures are calculated and it is found that sum of latitudes is equal to $\text{+2.1 m}$ and the sum of departures is equal to $\te...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Geomatics Engineering
gatecivil-2021-set2
traversing-survey
+
–
0
votes
0
answers
392
GATE Civil 2021 Set 2 | Question: 35
From laboratory investigations, the liquid limit, plastic limit, natural moisture content and flow index of a soil specimen are obtained as $60\%, 27\%, 32\%$ and $27$, respectively. The corresponding toughness index and liquidity index of the soil specimen, respectively, are $0.15$ and $1.22$ $0.19$ and $6.60$ $1.22$ and $0.15$ $6.60$ and $0.19$
From laboratory investigations, the liquid limit, plastic limit, natural moisture content and flow index of a soil specimen are obtained as $60\%, 27\%, 32\%$ and $27$, r...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Soil Mechanics
gatecivil-2021-set2
compaction-of-soil
atterberg-limits
+
–
0
votes
0
answers
393
GATE Civil 2021 Set 2 | Question: 36
A function is defined in Cartesian coordinate system as $f(x,y)=xe^{y}$. The value of the directional derivative of the function ($\textit{in integer}$) at the point $(2,0)$ along the direction of the straight line segment from point $(2, 0)$ to point $\left ( \dfrac{1}{2} ,2\right )$ is _________
A function is defined in Cartesian coordinate system as $f(x,y)=xe^{y}$. The value of the directional derivative of the function ($\textit{in integer}$) at the point $(2,...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Calculus
gatecivil-2021-set2
numerical-answers
calculus
directional-derivatives
+
–
0
votes
0
answers
394
GATE Civil 2021 Set 2 | Question: 37
An elevated cylindrical water storage tank is shown in the figure. The tank has inner diameter of $\text{1.5 m}$. It is supported on a solid steel circular column of diameter $\text{75 mm}$ and total height $\text{(L)}$ of $\text{4m}$ ... $\text{(h)}$ of the water permissible (in $\text{m}$, $\textit{round off to one decimal place}$) is ________________________
An elevated cylindrical water storage tank is shown in the figure. The tank has inner diameter of $\text{1.5 m}$. It is supported on a solid steel circular column of diam...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Solid Mechanics
gatecivil-2021-set2
numerical-answers
buckling-of-column
+
–
0
votes
0
answers
395
GATE Civil 2021 Set 2 | Question: 38
A prismatic fixed-fixed beam, modelled with a total lumped-mass of $\text{10 kg}$ as a single degree of freedom $\text{(SDOF)}$ system is shown in the figure. If the flexural stiffness of the beam is $4 \pi ^{2}$ $\text{kN/m}$, its natural frequency of vibration (in $\text{Hz}$, $\textit{in integer}$) in the flexural mode will be ______________
A prismatic fixed-fixed beam, modelled with a total lumped-mass of $\text{10 kg}$ as a single degree of freedom $\text{(SDOF)}$ system is shown in the figure.If the flexu...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Structural Analysis
gatecivil-2021-set2
numerical-answers
stiffness-and-flexibility-methods
structural-analysis
+
–
0
votes
0
answers
396
GATE Civil 2021 Set 2 | Question: 40
A fire hose nozzle directs a steady stream of water of velocity $\text{50 m/s}$ at an angle of $45^{\circ}$ above the horizontal. The stream rises initially but then eventually falls to the ground. Assume water as incompressible and ... ) reached by the stream above the hose nozzle will then be __________
A fire hose nozzle directs a steady stream of water of velocity $\text{50 m/s}$ at an angle of $45^{\circ}$ above the horizontal. The stream rises initially but then even...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Fluid Mechanics
gatecivil-2021-set2
numerical-answers
properties-of-fluids
fluid-statics
+
–
0
votes
0
answers
397
GATE Civil 2021 Set 2 | Question: 41
A rectangular cross-section of a reinforced concrete beam is shown in the figure. The diameter of each reinforcing bar is $\text{16 mm}$. The values of modulus of elasticity of concrete and steel are $2.0 \times 10^{4} \text{ MPa}$ ... $\text{(x)}$ for the uncracked section (in $\text{mm}, \textit{round off to one decimal place}$) is ______________
A rectangular cross-section of a reinforced concrete beam is shown in the figure. The diameter of each reinforcing bar is $\text{16 mm}$. The values of modulus of elastic...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Concrete Structures
gatecivil-2021-set2
numerical-answers
prestressed-concrete-beams
+
–
0
votes
0
answers
398
GATE Civil 2021 Set 2 | Question: 42
The activity details for a small project are given in the Table. ... $\text{days}, \textit{in integer}$) for project completion is __________________________
The activity details for a small project are given in the Table.$$\begin{array}{|cl|cI|cI|}\hline&\textbf{Activity} & \textbf{Duration (days)} & \textbf{Depends on} \\ \h...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Construction Materials and Management
gatecivil-2021-set2
numerical-answers
construction-management
project-planning
+
–
0
votes
0
answers
399
GATE Civil 2021 Set 2 | Question: 43
An equipment has been purchased at an initial cost of $₹ 160000$ and has an estimated salvage value of $₹ 10000$. The equipment has an estimated life of $5$ years. The difference between the book values (in ₹, $\textit{in integer}$) ... at the end of $4^{\text{th}}$ year using straight line method and sum of years digit method of depreciation is______________
An equipment has been purchased at an initial cost of $₹ 160000$ and has an estimated salvage value of $₹ 10000$. The equipment has an estimated life of $5$ years. Th...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Construction Materials and Management
gatecivil-2021-set2
numerical-answers
cost-estimation
+
–
0
votes
0
answers
400
GATE Civil 2021 Set 2 | Question: 44
A rectangular footing of size $\text{2.8 m}$ $\times$ $\text{3.5 m}$ is embedded in a clay layer and a vertical load is placed with an eccentricity of $\text{0.8 m}$ as shown in the figure (not to scale). Take Bearing ... $2.5$ is ________________________
A rectangular footing of size $\text{2.8 m}$ $\times$ $\text{3.5 m}$ is embedded in a clay layer and a vertical load is placed with an eccentricity of $\text{0.8 m}$ as s...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Foundation Engineering
gatecivil-2021-set2
numerical-answers
shallow-foundation
meyerhoffs-bearing-capacity-theories
+
–
Page:
« prev
1
...
7
8
9
10
11
12
13
...
36
next »
GO Civil
Email or Username
Show
Hide
Password
I forgot my password
Remember
Log in
Register