Register
Filter

Recent questions in Structural Engineering

0 votes
0 answers
42
GATE2020 CE-2-8
As per $IS\:456:2000$, the $pH$ value of water for concrete mix shall NOT be less than $4.5$ $5.0$ $5.5$ $6.0$
As per $IS\:456:2000$, the $pH$ value of water for concrete mix shall NOT be less than$4.5$$5.0$$5.5$$6.0$
0 votes
0 answers
47
GATE2020 CE-2-41
A concrete beam of span $15\: m,\ 150\: mm$ wide and $350\: mm$ ... cable is tensioned from one end only, the percentage loss (round off to one decimal place) in the cable force due to friction, is ________.
A concrete beam of span $15\: m,\ 150\: mm$ wide and $350\: mm$ deep is prestressed with a parabolic cable as shown in the figure (not drawn to the scale). Coefficient of...
0 votes
0 answers
53
GATE2017 CE-2-14
Consider the following frame in the figure: If the axial and shear deformations in different members of the frame are assumed to be negligible, the reduction in the degree of kinematical indeterminacy would be equal to $5$ $6$ $7$ $8$
Consider the following frame in the figure:If the axial and shear deformations in different members of the frame are assumed to be negligible, the reduction in the degree...
0 votes
0 answers
61
GATE2017 CE-2-39
A hallow circular shaft has an outer diameter of $100 $ mm and inner diameter of $50 $ mm. If the allowable shear stress is $125$ MPa, the maximum torque (in kN-m) that the shaft can resist is _______
A hallow circular shaft has an outer diameter of $100 $ mm and inner diameter of $50 $ mm. If the allowable shear stress is $125$ MPa, the maximum torque (in kN-m) that t...
1 votes
0 answers
67
GATE2019 CE-1: 5
A plane truss is shown in the figure (not drawn to scale). Which one of the options contains ONLY zero force members in the truss? $\text{FG,FI,HI,RS}$ $\text{FG,FH,HI,RS}$ $\text{FI,HI,PR,RS}$ $\text{FI,FG,RS,PR}$
A plane truss is shown in the figure (not drawn to scale).Which one of the options contains ONLY zero force members in the truss?$\text{FG,FI,HI,RS}$$\text{FG,FH,HI,RS}$$...
1 votes
0 answers
68
GATE2019 CE-1: 6
An element is subjected to biaxial normal tensile strains of $0.0030$ and $0.0020$. The normal strain in the plane of maximum shear strain is Zero $0.0010$ $0.0025$ $0.0050$
An element is subjected to biaxial normal tensile strains of $0.0030$ and $0.0020$. The normal strain in the plane of maximum shear strain isZero$0.0010$$0.0025$$0.0050$
0 votes
0 answers
71
GATE2019 CE-1: 9
In the reinforced beam section shown in the figure $\text{(not drawn to scale)}$, the nominal cover provided at the bottom of the beam as per $\text{IS 456-2000},$ is $\text{30 mm}$ $\text{36 mm}$ $\text{42 mm}$ $\text{50 mm}$
In the reinforced beam section shown in the figure $\text{(not drawn to scale)}$, the nominal cover provided at the bottom of the beam as per $\text{IS 456-2000},$ is$\te...
0 votes
0 answers
75
GATE2019 CE-1: 33
If the section shown in the figure turns from fully-elastic to fully-plastic, the depth of neural axis (N.A), $\overline{y}$, decreases by $10.75 \: mm$ $12.25 \: mm$ $13.75 \: mm$ $15.25 \: mm$
If the section shown in the figure turns from fully-elastic to fully-plastic, the depth of neural axis (N.A), $\overline{y}$, decreases by$10.75 \: mm$$12.25 \: mm$$13.75...
Page: