GO Civil
Login
Register
Dark Mode
Brightness
Profile
Edit Profile
Messages
My favorites
My Updates
Logout
Filter
Recent
Hot!
Most votes
Most answers
Most views
Previous GATE
Featured
Most viewed questions
0
votes
0
answers
81
GATE2019 CE-1: 49
The hyetograph of a storm event of duration $140$ minutes is shown in the figure: The infiltration capacity at the start of this event $(t=0)$ is $17 \: mm/hour$, which linearly decreases to $10 \: mm/hour$ after $40$ minutes duration. As the event ... of the storm event. The value of the infiltration index, $\phi$ (in $mm/hour$ round off to $2$ decimal places), is _____________
The hyetograph of a storm event of duration $140$ minutes is shown in the figure:The infiltration capacity at the start of this event $(t=0)$ is $17 \: mm/hour$, which li...
Arjun
13.0k
points
Arjun
asked
Feb 14, 2019
Hydrology
gate2019-ce-1
numerical-answers
water-resources-engineering
hydrology
infiltration
+
–
1
votes
1
answer
82
GATE Civil 2023 Set 2 | GA Question: 2
Kind : _________ :: Often : Seldom (By word meaning) Cruel Variety Type Kindred
Kind : _________ :: Often : Seldom(By word meaning)CruelVarietyType Kindred
admin
4.2k
points
admin
asked
May 21, 2023
Verbal Aptitude
gatecivil-2023-set2
verbal-aptitude
word-pairs
+
–
0
votes
0
answers
83
GATE2014-2-49
A waste water stream (flow $=2 m^3/s$, ultimate BOD$=90$ mg/l) is joining a small river (flow $=12 \: m^3/s$, ultimate BOD $=5$ mg/l). Both water streams get mixed up instantaneously. Cross-sectional area of the river is $50 \: m^2$. Assuming the de-oxygenation rate ... $10$ km downstream of the mixing point is $1.68$ $12.63$ $15.46$ $1.37$
A waste water stream (flow $=2 m^3/s$, ultimate BOD$=90$ mg/l) is joining a small river (flow $=12 \: m^3/s$, ultimate BOD $=5$ mg/l). Both water streams get mixed up ins...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 25, 2018
Water and Waste Water Quality and Treatment
gate2014-ce-2
water-and-waste-water-quality-and-treatment
environmental-engineering
de-oxygenation-rate-constant
waste-water-stream
+
–
0
votes
0
answers
84
GATE2014-2-31
The beam of an overall depth $250$ mm (shown below) is used in a building subjected to two different thermal environments. The temperatures at the top and bottom surfaces of the beam are $36^{\circ}$ and $72^{\circ}$ respectively. Considering coefficient of thermal ... per $^{\circ}C$, the vertical deflection of the beam (in mm) at its mid-span due to temperature gradient is ________
The beam of an overall depth $250$ mm (shown below) is used in a building subjected to two different thermal environments. The temperatures at the top and bottom surfaces...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 25, 2018
Structural Engineering
gate2014-ce-2
numerical-answers
structural-engineering
temperature-gradient
+
–
1
votes
1
answer
85
GATE Civil 2020 Set 2 | GA Question: 4
After the inauguration of the new building, the Head of the Department (HoD) collated faculty preferences for office space. $P$ wanted a room adjacent to the lab. $Q$ wanted to be close to the lift. $R$ wanted a view of the playground and $S$ wanted a corner office. Assuming that everyone was satisfied, which among the following shows a possible allocation?
After the inauguration of the new building, the Head of the Department (HoD) collated faculty preferences for office space. $P$ wanted a room adjacent to the lab. $Q$ wan...
go_editor
5.3k
points
go_editor
asked
Feb 13, 2020
Analytical Aptitude
gate2020-ce-2
analytical-aptitude
logical-reasoning
+
–
1
votes
1
answer
86
GATE Civil 2021 Set 2 | GA Question: 5
Four persons $P, Q, R$ and $S$ are to be seated in a row. $R$ should not be seated at the second position from the left end of the row. The number of distinct seating arrangements possible is: $6$ $9$ $18$ $24$
Four persons $P, Q, R$ and $S$ are to be seated in a row. $R$ should not be seated at the second position from the left end of the row. The number of distinct seating arr...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Quantitative Aptitude
gatecivil-2021-set2
numerical-ability
permutation-and-combination
seating-arrangements
+
–
0
votes
1
answer
87
GATE2018 CE-2: 54
A $7.5$ m wide two-lane road on a plain terrain is to be laid along a horizontal curve of radius $510$ m. For a design speed of $100$ kmph, super elevation is provided as per $\text{IRC:}73-1980$. Consider acceleration due to gravity as $9.81 m/s^2$. The level difference between the inner and outer edges of the road (in m, upto three decimal places is ________
A $7.5$ m wide two-lane road on a plain terrain is to be laid along a horizontal curve of radius $510$ m. For a design speed of $100$ kmph, super elevation is provided as...
gatecse
4.0k
points
gatecse
asked
Feb 17, 2018
Traffic Engineering
gate2018-ce-2
numerical-answers
traffic-engineering
transportation-engineering
urban-roads
+
–
0
votes
0
answers
88
GATE2016-2-18
A water supply board is responsible for treating $1500 \:m^3/day$ of water. A settling column analysis indicates that an overflow rate of $20 \: m/day$ will produce satisfactory removal for a depth of $3.1 \: m$. It is decided to have two circular settling tanks in parallel. The required diameter (expressed in $m$) of the settling tank is __________
A water supply board is responsible for treating $1500 \:m^3/day$ of water. A settling column analysis indicates that an overflow rate of $20 \: m/day$ will produce satis...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 27, 2018
Water and Waste Water Quality and Treatment
gate2016-ce-2
numerical-answers
environmental-engineering
water-and-waste-water-quality-and-treatment
drinking-water-treatment
+
–
0
votes
0
answers
89
GATE2017 CE-2-20
A two-faced fair coin has its faces designated as head (H) and tail (T). This coin is tossed three times in succession to record the following outcomes: H, H, H. If the coin is tossed one more time, the probability (up to one decimal place) of obtaining H again, given the previous realizations of H, H and H, would be ________
A two-faced fair coin has its faces designated as head (H) and tail (T). This coin is tossed three times in succession to record the following outcomes: H, H, H. If the c...
gatecse
4.0k
points
gatecse
asked
Aug 7, 2019
Probability and Statistics
gate2017-ce-2
numerical-answers
probability-and-statistics
probability
conditional-probability
+
–
0
votes
0
answers
90
GATE2018 CE-1: 8
A solid circular beam with radius of $0.25$ m and length of $2$ m is subjected to a twisting moment of $20$ kNm about the z-axis at the free end, which is the only load acting as shown in the figure. The shear stress component $\tau_{xy}$ at point 'M' in the cross-section of the beam at a distance of $1$ m from the fixed end is $0.0$ MPa $0.51$ MPa $0.815$ MPa $2.0$ MPa
A solid circular beam with radius of $0.25$ m and length of $2$ m is subjected to a twisting moment of $20$ kNm about the z-axis at the free end, which is the only load a...
gatecse
4.0k
points
gatecse
asked
Feb 17, 2018
Structural Analysis
gate2018-ce-1
structural-analysis
structural-engineering
shear-stress
analysis-of-beams
+
–
0
votes
0
answers
91
GATE Civil 2022 Set 2 | Question: 1
The function $f(x,y)$ satisfies the Laplace equation $\bigtriangledown^{2}f(x,y) = 0$ on a circular domain of radius $r=1$ with its center at point $P$ with coordinates $x=0, y=0.$ The value of this function on the circular boundary of this domain is equal to $3.$ The numerical value of $f(0,0)$ is: $0$ $2$ $3$ $1$
The function $f(x,y)$ satisfies the Laplace equation $$\bigtriangledown^{2}f(x,y) = 0$$on a circular domain of radius $r=1$ with its center at point $P$ with coordinates$...
Arjun
13.0k
points
Arjun
asked
Feb 15, 2022
Others
gatecivil-2022-set2
+
–
1
votes
1
answer
92
GATE Civil 2020 Set 2 | GA Question: 2
Select the most appropriate word that can replace the underlined word without changing the meaning of the sentence: Now-a-days, most children have a tendency to belittle the legitimate concerns of their parents. disparage applaud reduce begrudge
Select the most appropriate word that can replace the underlined word without changing the meaning of the sentence:Now-a-days, most children have a tendency to belittle t...
go_editor
5.3k
points
go_editor
asked
Feb 13, 2020
Verbal Aptitude
gate2020-ce-2
verbal-ability
most-appropriate-word
+
–
0
votes
2
answers
93
GATE2018 CE-1: 42
The dimensions of a symmetrical welded I-section are shown in the figure. The plastic section modulus about the weaker axis (in $cm^3$, up to decimal place) is _____
The dimensions of a symmetrical welded I-section are shown in the figure.The plastic section modulus about the weaker axis (in $cm^3$, up to decimal place) is _____
gatecse
4.0k
points
gatecse
asked
Feb 17, 2018
Steel Structures
gate2018-ce-1
numerical-answers
steel-structures
structural-engineering
concept-of-plastic-analysis
welded-i-section
+
–
1
votes
1
answer
94
phase relationships of soil
a natural soil deposits has bulk density of 1.90g/cm^3 and water content of 6 percent . assume G=2.67 . asuming the voids ratio to remain constant , what will be degree of saturation at water content of 16%?
a natural soil deposits has bulk density of 1.90g/cm^3 and water content of 6 percent . assume G=2.67 . asuming the voids ratio to remain constant , what will be degree o...
sarthika
130
points
sarthika
asked
May 7, 2022
2
votes
1
answer
95
GATE Civil 2021 Set 1 | GA Question: 4
$\bigoplus$ and $\bigodot$ are two operators on numbers $\text{p}$ and $\text{q}$ such that $p \bigoplus q=\dfrac{p^{2}+q^{2}}{pq}$ and $p \bigodot q=\dfrac{p^{2}}{q}$; If $x\bigoplus y=2\bigodot 2$, then $x=$ $\frac{y}{2}$ $y$ $\frac{3y}{2}$ $2y$
$\bigoplus$ and $\bigodot$ are two operators on numbers $\text{p}$ and $\text{q}$ such that $p \bigoplus q=\dfrac{p^{2}+q^{2}}{pq}$ and $p \bigodot q=\d...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Quantitative Aptitude
gatecivil-2021-set1
numerical-ability
algebra
+
–
0
votes
0
answers
96
GATE2015-2-39
A pile of diameter $0.4$ m is fully embedded in a clay stratum having $5$ layers, each $5$ m thick as shown in the figure below. Assume a constant unit weight of soil as $18 \: kN/m^3$ for all the layers. Using $\lambda$-method. ($ \lambda = 0.15$ for $25$ m embedment length) and neglecting the end bearing component the ultimate pile capacity (in kN) is ___________.
A pile of diameter $0.4$ m is fully embedded in a clay stratum having $5$ layers, each $5$ m thick as shown in the figure below. Assume a constant unit weight of soil as ...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Geotechnical Engineering
gate2015-ce-2
numerical-answers
geotechnical-engineering
foundation-engineering
load-capacity-of-piles-in-clays
+
–
0
votes
0
answers
97
GATE2019 CE-1: 47
A parabolic vertical curve is being designed to join a road of grade $+5 \%$ with a road of grade $-3 \%$. The length of the vertical curve is $400 \: m$ measured along the horizontal. The vertical point of curvature (VPC) is located on the ... $m$, round off to the nearest integer) is _________
A parabolic vertical curve is being designed to join a road of grade $+5 \%$ with a road of grade $-3 \%$. The length of the vertical curve is $400 \: m$ measured along t...
Arjun
13.0k
points
Arjun
asked
Feb 14, 2019
Geomatics Engineering
gate2019-ce-1
numerical-answers
horizontal-and-vertical-curves
geomatics-engineering
+
–
0
votes
0
answers
98
GATE2018 CE-1: 44
At a construction site, a contractor plans to make an excavation as shown in the figure. The water level in the adjacent river is at an elevation of $+20.0$ m. Unit weight of water is $10 \: kn/m^3$. The factor of safety (up to two decimal places) against sand boiling for the proposed excavation is ___________
At a construction site, a contractor plans to make an excavation as shown in the figure.The water level in the adjacent river is at an elevation of $+20.0$ m. Unit weight...
gatecse
4.0k
points
gatecse
asked
Feb 17, 2018
Construction Materials and Management
gate2018-ce-1
numerical-answers
construction-materials-and-management
structural-engineering
construction-contracts
+
–
1
votes
1
answer
99
GATE Civil 2020 Set 2 | GA Question: 10
The monthly distribution of $9$ Watt LED bulbs sold by two firms $X$ and $Y$ from January to June $2018$ is shown in the pie-chart and the corresponding table. If the total number of LED bulbs sold by the two firms during April-June $2018$ is $50000$, then the ... $11250$ $9750$ $8750$ $8250$
The monthly distribution of $9$ Watt LED bulbs sold by two firms $X$ and $Y$ from January to June $2018$ is shown in the pie-chart and the corresponding table. If the tot...
go_editor
5.3k
points
go_editor
asked
Feb 13, 2020
Quantitative Aptitude
gate2020-ce-2
numerical-ability
data-interpretation
pie-chart
+
–
1
votes
1
answer
100
GATE Civil 2021 Set 1 | GA Question: 6
$\text{Statement:}$ Either $\text{P}$ marries $\text{Q}$ or $\text{X}$ marries $\text{Y}$ Among the options below, the logical $\text{NEGATION}$ of the above statement is : $\text{P}$ does not marry $\text{Q}$ and $\text{X}$ marries $\text{Y}$ Neither ... $\text{P}$ marries $\text{Q}$ $\text{P}$ marries $\text{Q}$ and $\text{X}$ marries $\text{Y}$
$\text{Statement:}$ Either $\text{P}$ marries $\text{Q}$ or $\text{X}$ marries $\text{Y}$Among the options below, the logical $\text{NEGATION}$ of the above statement is ...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Analytical Aptitude
gatecivil-2021-set1
analytical-aptitude
logical-reasoning
family-relationships
+
–
0
votes
0
answers
101
GATE Civil 2021 Set 1 | Question: 42
A square plate $\text{O-P-Q-R}$ of a linear elastic material with sides $1.0\text{ m}$ is loaded in a state of plane stress. Under a given stress condition, the plate deforms to a new configuration $O-{P}'-{Q}'-{R}'$ as shown ... $\text{O-P-Q-R}$ (in $\text{mm}, \textit{round off to one decimal place}$) is __________________
A square plate $\text{O-P-Q-R}$ of a linear elastic material with sides $1.0\text{ m}$ is loaded in a state of plane stress. Under a given stress condition, the plate def...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Steel Structures
gatecivil-2021-set1
numerical-answers
working-stress-concepts
+
–
0
votes
0
answers
102
GATE2018 CE-2: 15
In the figures, Group I represents the atmospheric temperature profiles (P, Q, R and S) and Group II represents dispersion of pollutants from a smoke stack $(1, 2, 3$ and $4)$. In the figures of Group I, the dashed line represents the dry adiabatic lapse rate, whereas the horizontal axis represents temperature and ... $P-1, Q-4, R-3, S-2$ $P-3, Q-1, R-2, S-4$
In the figures, Group I represents the atmospheric temperature profiles (P, Q, R and S) and Group II represents dispersion of pollutants from a smoke stack $(1, 2, 3$ and...
gatecse
4.0k
points
gatecse
asked
Feb 17, 2018
Air Pollution
gate2018-ce-2
environmental-engineering
air-pollution
sources-and-impacts-of-pollutants
+
–
1
votes
1
answer
103
GATE Civil 2021 Set 1 | GA Question: 8
Five line segments of equal lengths, $\text{PR, PS, QS, QT}$ and $\text{RT}$ are used to form a star as shown in the figure above. The value of $\theta$, in degrees, is _______________ $36$ $45$ $72$ $108$
Five line segments of equal lengths, $\text{PR, PS, QS, QT}$ and $\text{RT}$ are used to form a star as shown in the figure above.The value of $\theta$, in degrees, is __...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Quantitative Aptitude
gatecivil-2021-set1
numerical-ability
geometry
+
–
0
votes
0
answers
104
GATE2017 CE-2-5
Consider the following statements related to pore pressure parameters, $A$ and $B$: $A$ always lies between $0$ and $1.0$ $A$ can be less than $0$ or greater than $1.0$ $B$ always lies between $0$ and $1.0$ $B$ can be less than $0$ or greater than $1.0$ For these statements, which of the following options is correct? P and R P and S Q and R Q and S
Consider the following statements related to pore pressure parameters, $A$ and $B$:$A$ always lies between $0$ and $1.0$$A$ can be less than $0$ or greater than $1.0$$B$ ...
gatecse
4.0k
points
gatecse
asked
Aug 7, 2019
Soil Mechanics
gate2017-ce-2
geotechnical-engineering
soil-mechanics
pore-pressure
+
–
0
votes
0
answers
105
GATE2017 CE-2-9
Following observations have ben made for the elevation and temperature to ascertain the stability of the atmosphere: $\begin{array}{|c|c|} \hline \text{Elevation (in m) } & \text{Temperature (in }^{\circ} \text{C)} \\ \hline 10 & 15.5 \\ \hline 60 & 15.0 \\ \hline 130 & 14.3 \\ \hline \end{array}$ The atmosphere is classified as Stable Unstable Neutral Inverse
Following observations have ben made for the elevation and temperature to ascertain the stability of the atmosphere:$$\begin{array}{|c|c|} \hline \text{Elevation (in m) }...
gatecse
4.0k
points
gatecse
asked
Aug 7, 2019
Air Pollution
gate2017-ce-2
environmental-engineering
air-pollution
atmosphere
+
–
1
votes
0
answers
106
GATE2016-2-27
If $f(x)$ and $g(x)$ are two probability density functions, $f(x) = \begin{cases} \dfrac{x}{a}+1 & :-a \leq x < 0 \\ -\dfrac{x}{a}+1 & : 0 \leq x \leq a \\ 0 & :\text{otherwise} \end{cases}$ ... different; Variance of $f(x)$ and $g(x)$ are same Mean of $f(x)$ and $g(x)$ are different; Variance of $f(x)$ and $g(x)$ are different
If $f(x)$ and $g(x)$ are two probability density functions,$f(x) = \begin{cases} \dfrac{x}{a}+1 & :-a \leq x < 0 \\ -\dfrac{x}{a}+1 & : 0 \leq x \leq a \\ 0 & :\text{oth...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 27, 2018
Probability and Statistics
gate2016-ce-2
probability-and-statistics
probability
probability-density-function
variance
+
–
0
votes
0
answers
107
GATE2019 CE-1: 12
An isolated concrete pavement slab of length $L$ is resting on a frictionless base. The temperature of the top and bottom fibre of the slab are $T_t$ and $T_b$, respectively. Given: the coefficient of thermal expansion $=\alpha$ and the elastic modulus $=E$ ... is calculated as $L \alpha (T_t-T_b)$ $E \alpha (T_t-T_b)$ $\dfrac{E \alpha (T_t-T_b)}{2}\\$ zero
An isolated concrete pavement slab of length $L$ is resting on a frictionless base. The temperature of the top and bottom fibre of the slab are $T_t$ and $T_b$, respectiv...
Arjun
13.0k
points
Arjun
asked
Feb 14, 2019
Highway Pavements
gate2019-ce-1
highway-pavements
concrete-pavements
transportation-engineering
+
–
1
votes
1
answer
108
GATE Civil 2022 Set 2 | GA Question: 2
$x:y:z = \frac{1}{2} : \frac{1}{3} : \frac{1}{4}.$ What is the value of $\frac{x+z-y}{y} ?$ $0.75$ $1.25$ $2.25$ $3.25$
$x:y:z = \frac{1}{2} : \frac{1}{3} : \frac{1}{4}.$What is the value of $\frac{x+z-y}{y} ?$$0.75$$1.25$$2.25$$3.25$
Arjun
13.0k
points
Arjun
asked
Feb 15, 2022
Quantitative Aptitude
gatecivil-2022-set2
quantitative-aptitude
ratio-proportion
+
–
0
votes
0
answers
109
GATE2015-1-20
Total Kjeldahl Nitrogen (TKN) concentration (mg/L as N) in domestic sewage is the sum of the concentrations of organic and inorganic nitrogen in sewage organic nitrogen and nitrate in sewage organic nitrogen and ammonia in sewage ammnia and nitrate in sewage
Total Kjeldahl Nitrogen (TKN) concentration (mg/L as N) in domestic sewage is the sum of the concentrations oforganic and inorganic nitrogen in sewageorganic nitrogen and...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Water and Waste Water Quality and Treatment
gate2015-ce-1
water-and-waste-water-quality-and-treatment
environmental-engineering
sewage-treatment
+
–
0
votes
0
answers
110
GATE2015-1-51
The acceleration-time relationship for a vehicle subjected to non-uniform acceleration is, $\dfrac{dv}{dt} = (\alpha\: - \beta v_0) e^{ - \beta t}$ where, $v$ is the speed in m/s, $t$ is the time in s, $\alpha$ and $\beta$ are parameters, and $v_0$ is the initial speed ... $\dfrac{dv}{dt}=1.3 m/s^2$ at $t=3$s, the distance (in m) travelled by the vehicle in $35$ s is ________
The acceleration-time relationship for a vehicle subjected to non-uniform acceleration is,$$\dfrac{dv}{dt} = (\alpha\: – \beta v_0) e^{ - \beta t}$$where, $v$ is the sp...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 26, 2018
Traffic Engineering
gate2015-ce-1
numerical-answers
traffic-engineering
transportation-engineering
speed
acceleration-time-relationship
+
–
0
votes
0
answers
111
GATE Civil 2012 | Question: 45
The following data are related to a horizontal curved portion of a two-lane highway: length of curve $200$ m, radius of curve $=300$ m and with of pavement $=7.5$ m. In order to provide a stopping sight distance (SSD) of $80$ m, the set back distance (in m) required from the centre line of the inner lane of the pavement is $2.54$ $4.55$ $7.10$ $7.96$
The following data are related to a horizontal curved portion of a two-lane highway: length of curve $200$ m, radius of curve $=300$ m and with of pavement $=7.5$ m. In o...
Milicevic3306
11.9k
points
Milicevic3306
asked
Mar 25, 2018
Transportation Infrastructure
gate2012-ce
transportation-engineering
transportation-infrastructure
geometric-design-of-highways
+
–
0
votes
0
answers
112
GATE Civil 2023 Set 2 | Question: 50
For the flow setup shown in the figure (not to scale), the hydraulic conductivities of the two soil samples, Soil $1$ and Soil $2,$ are $10 \mathrm{~mm} / \mathrm{s}$ and $1 \mathrm{~mm} / \mathrm{s}$, respectively. Assume ... total head (in $\mathrm{m}$, rounded off to two decimal places) at any point located at the junction of the two samples? _____________
For the flow setup shown in the figure (not to scale), the hydraulic conductivities of the two soil samples, Soil $1$ and Soil $2,$ are $10 \mathrm{~mm} / \mathrm{s}$ and...
admin
4.2k
points
admin
asked
May 21, 2023
Others
gatecivil-2023-set2
+
–
0
votes
0
answers
113
GATE Civil 2022 Set 2 | Question: 8
Stresses acting on an infinitesimal soil element are shown in the figure (with $\sigma_{z} > \sigma_{x}$). The major and minor principal stresses are $\sigma_{1}$ and $\sigma_{3},$ respectively. Considering the compressive stresses as positive, which one of the following ... $\tan^{-1} \left( \frac{\tau_{zx}} {\sigma_{1} + \sigma_{3}} \right)$
Stresses acting on an infinitesimal soil element are shown in the figure (with $\sigma_{z} \sigma_{x}$). The major and minor principal stresses are $\sigma_{1}$ and $\si...
Arjun
13.0k
points
Arjun
asked
Feb 15, 2022
Others
gatecivil-2022-set2
+
–
0
votes
0
answers
114
GATE Civil 2021 Set 1 | Question: 41
Employ stiffness matrix approach for the simply supported beam as shown in the figure to calculate unknown displacements/rotations. Take length, $L=8\text{ m}$; modulus of elasticity, $E=3\times 10^{4} \text{N/mm}^{2}$ ... (in $\text{mm}, \textit{round off to integer}$) under $\text{P=100 kN}$ in downward direction will be _________________
Employ stiffness matrix approach for the simply supported beam as shown in the figure to calculate unknown displacements/rotations. Take length, $L=8\text{ m}$; modulus o...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Structural Analysis
gatecivil-2021-set1
numerical-answers
slope-deflection-method
simply-supported-beam
+
–
0
votes
2
answers
115
GATE2018 CE-1: 43
Consider the deformable pin-joined truss with loading, geometry and section properties as shown in the figure. Given that $E = 2 \times 10^{11} N/m^2, \: A=10 mm^2, L=1 m$ and $P=1 kN$. The horizontal displacement of Joint C (in mm, up to one decimal place) is _____
Consider the deformable pin-joined truss with loading, geometry and section properties as shown in the figure.Given that $E = 2 \times 10^{11} N/m^2, \: A=10 mm^2, L=1 m$...
gatecse
4.0k
points
gatecse
asked
Feb 17, 2018
Structural Analysis
gate2018-ce-1
numerical-answers
structural-engineering
structural-analysis
analysis-of-trusses
+
–
0
votes
0
answers
116
GATE2019 CE-1: 43
A staff is placed on a benchmark (BM) of reduced level (RL) $100.000 \: m$ and a theodolite is placed at a horizontal distance of $50 \: m$ from the BM to measure the vertical angles. The measured vertical angles from the horizontal at the staff readings of ... the same. Taking the height of the instrument as $1.400 \: m$, the RL (in $m$) of the theodolite station is ____________
A staff is placed on a benchmark (BM) of reduced level (RL) $100.000 \: m$ and a theodolite is placed at a horizontal distance of $50 \: m$ from the BM to measure the ver...
Arjun
13.0k
points
Arjun
asked
Feb 14, 2019
Transportation Engineering
gate2019-ce-1
numerical-answers
transportation-engineering
transportation-infrastructure
horizontal-and-vertical-alignments
+
–
0
votes
0
answers
117
GATE2018 CE-1: 32
A closed tank contains $0.5$ m thick layer of mercury (specific gravity $=13.6$) at the bottom. A $2.0$ m thick layer of water lies above the mercury layer. A $3.0$ m thick layer of oil (specific gravity $=0.6$) lies above the water layer. The space above the oil layer contains air under ... air space is $92.214 \: kN/m^2$ $95.644 \: kN/m^2$ $98.922 \: kN/m^2$ $99.321 \: kN/m^2$
A closed tank contains $0.5$ m thick layer of mercury (specific gravity $=13.6$) at the bottom. A $2.0$ m thick layer of water lies above the mercury layer. A $3.0$ m thi...
gatecse
4.0k
points
gatecse
asked
Feb 17, 2018
Fluid Mechanics
gate2018-ce-1
water-resources-engineering
fluid-mechanics
concept-of-boundary-layer-and-its-growth
+
–
2
votes
1
answer
118
GATE Civil 2021 Set 2 | GA Question: 4
$\oplus$ and $\odot$ are two operators on numbers $p$ and $q$ such that $p \odot q = p-q,$ and $p \oplus q = p\times q$ Then, $\left ( 9\odot \left ( 6\oplus 7 \right ) \right )\odot \left ( 7\oplus \left ( 6 \odot 5 \right ) \right )=$ $40$ $-26$ $-33$ $-40$
$\oplus$ and $\odot$ are two operators on numbers $p$ and $q$ such that $p \odot q = p-q,$ and $p \oplus q = p\times q$Then, $\left ( 9\odot \left ( 6\oplus 7 \right ) \r...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Quantitative Aptitude
gatecivil-2021-set2
numerical-ability
algebra
+
–
0
votes
1
answer
119
GATE2018 CE-1: 4
A column of height $h$ with a rectangular cross-section of size $a \times 2a$ has a buckling load of $P$. If the cross-section is changed to $0.5 a \times 3a$ and its height changed to 1.5$h$, the buckling load of the redesigned column will be $P/12$ $P/4$ $P/2$ $3P/4$
A column of height $h$ with a rectangular cross-section of size $a \times 2a$ has a buckling load of $P$. If the cross-section is changed to $0.5 a \times 3a$ and its hei...
gatecse
4.0k
points
gatecse
asked
Feb 17, 2018
Solid Mechanics
gate2018-ce-1
solid-mechanics
structural-engineering
buckling-of-column
+
–
0
votes
0
answers
120
GATE2019 CE-2: 31
In the context of provisions relating to durability of concrete, consider the following assertions: $\textbf{Assertions:(1)}: $ As per $IS \: 456-2000$, air entrainment to the extent of $3 \%$ to $6 \%$ is required for concrete exposed to marine environment. ... and Assertion (2) is FALSE Both Assertion (1) and Assertion (2) are FALSE Both Assertion (1) and Assertion (2) are TRUE
In the context of provisions relating to durability of concrete, consider the following assertions:$\textbf{Assertions:(1)}: $ As per $IS \: 456-2000$, air entrainment to...
Arjun
13.0k
points
Arjun
asked
Feb 12, 2019
Concrete Structures
gate2019-ce-2
concrete-structures
structural-engineering
+
–
Page:
« prev
1
2
3
4
5
6
...
40
next »
GO Civil
Email or Username
Show
Hide
Password
I forgot my password
Remember
Log in
Register